Year: 1979
Type: report
Abstract: HYDRAULIC GEOMETRY AND CARRYING CAPACITY OF FLOODPLAINSHydraulic geometry relationships for floodplains of nine river basins in Illinois and four river basins outside of the state were developed.Relationships between floodplain width, cross-sectional area, surface area, depth, sinuosity, incision, and stream order have been developed.These hydraulic geometry parameters were also found to be related to the drainage area of the individual stream segments.Hydraulic geometry coefficients of the floodplains of Illinois streams were found to be similar although the developed relationships have different base values.Hypsometric analyses of the Illinois streams indicated that most of the streams in Illinois are in a mature stage of development.All of the hydraulic geometry parameters of the floodplains increased in the downstream direction.However, for some rivers, the cross-sectional areas showed an increase in the downstream direction up to a certain distance and then it decreased to some extent near the mouth of the river.Comparison of the hydraulic geometry parameters of the floodplains and the main streams indicated that the hydraulic geometry parameters of the floodplains increased at a lower rate in the downstream direction than did the corresponding parameters of the main streams.Data, such as number of bends, radius of curvature, deflection angle, and cross-sectional area, from the Embarras River were utilized to perform a statistical analysis.This analysis indicated that the deflection angle of the bends, the radius of curvature, and the length of the bend per unit deflection angle for each order of the stream fitted a log-normal probability distribution with two parameters very well.
Authors: Nani G. Bhowmik, John B. Stall
Language: English
Subfield: Earth-Surface Processes
Field: Earth and Planetary Sciences
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2154587659
