Year: 2012
Type: dissertation
Abstract: ENGLISH ABSTRACT: The air-to-air refuelling of large aircraft presents challenges such as a long fuel transfer time, slow aircraft responses and a large distance between the aircraft CG and the receptacle position. This project addresses some of these issues by adding a control system to keep the receiver aircraft in the correct position relative to the tanker to enable fuel transfer. This project investigates different control strategies which are designed to control the A330-300 during refuelling at one trim condition. The controllers are based on a mathematical aircraft model which was derived from a simulation model received from Airbus. The first set of controllers uses the aircraft actuators directly. Controllers that are based on the CG dynamics and the receptacle dynamics are compared. Due to the large distance between the CG and the receptacle it was found to be essential to control the receptacle position, and not only the CG position. Also, a controller that is based on a model of the receptacle dynamics performs better. The second set of controllers uses the aircraft manual control laws as an inner loop controller. This set of controllers and the last direct actuator controller use the same axial controller that uses the engine thrust to control axial position. It was found that both the direct actuator controller and the manual control laws controller are able to keep the receptacle within the disconnect envelope in moderate turbulence. In both sets of controllers the axial controller fails to keep the receptacle reliably within the disconnect envelope in light turbulence. From the results it is concluded that both the direct actuator control and manual control laws can be used to successfully control the receptacle position in the normal and lateral positions as long as the receptacle kinematics are included in the control design. Using only the engine thrust for axial control is insufficient. Several recommendations are made to improve the axial control and also how these results can be used in future work.
Author: Jeanne Marie Venter
Language: English
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2166410017