Work

Effect of ZnO:B Growth Temperature Deposited by MOCVD Technique on Film Properties and Thin Film Silicon Solar Cells Performance

Year: 2010
Type: article
Abstract: Boron doped Zinc Oxide (ZnO:B) films were deposited at various growth temperatures (120 – 240°C) by the Metal Organic Chemical Vapor Deposition (MOCVD) technique. The gas mixture of Diethyzinc (DEZ) and water (H2O) was used as reactant gas while Diborane (B2H6) was employed as the n-type doping gas. In this paper, the properties of ZnO:B film were investigated by Scanning Electron Microscopy (SEM), Hall’s measurement, step profile and UV/Visible Spectrometer with integrating sphere. It was found that, at the substrate temperature of about 210°C, ZnO:B film showed the carrier concentration, mobility, and resistivity of 4.0x1019 cm-3, 34.4 cm2v-1s-1, and 5.0x10-3 Ωcm, respectively. The total transmittance tended to decrease, while the grain size of the ZnO:B became lager with increasing substrate temperature. The effects of the growth temperatures of ZnO:B coated glass on the performance of thin film amorphous silicon solar cells were carried out with a structure of glass/MOCVD ZnO (2 μm) / p-μc-Si:H (20 nm) / i-a-Si:H (350 nm) / n-μc-Si:H (30 nm) / ZnO (80 nm) / Ag and an effective area of 0.73 cm2. The best solar cell was achieved at MOCVD ZnO:B growth temperature of 180ºC with VOC as high as 0.94 V, JSC of 13.8 mA/cm2, FF of 0.68, and efficiency of 8.7%.
Source: EU PVSEC
Authors: Sritharathikhun, J., Krudtad, P., Songtrai, S., Moollakorn, A., Limmanee, A., Sriprapha, K.
Language: English
Open Access status: green
OpenAlex ID: W2220442932
FWCI:
Cites:
Cited by: 1
Related to: 10