Year: 2004
Type: report
Abstract: This paper discusses the development of an experimental low charge hydrocarbon refrigeration system that can produce between 1 kW and 2 kW of cooling capacity with less than 150 grams of refrigerant.The hydrocarbon refrigerant used in this study is an instrument grade propane gas (R290).The development of this low charge system was made possible with the use of microchannel tubes with a hydraulic diameter between 0.75 mm and 1.1 mm.Microchannel tubes have enabled systems to be developed with much smaller internal volumes than a traditional fin and tube heat exchangers while maintaining the same capacity and coefficient of performance (COP) as in a traditional fin and tube heat exchanger.A similar capacity refrigeration system using propane with traditional fin and tube heat exchangers would require upwards of 200 grams of charge.This paper will discuss the experimental charge breakdown within each component as well as report the capacities and COP's for a variety of operating conditions therefore setting the baseline for future low charge systems. Chapter 3. Experimentally Validated Steady State Thermal Analysis and System Performance Model of a Low Charge Hydrocarbon Refrigeration System AbstractThis paper presents the development and verification of a steady state system model for evaluating the thermal performance of a low charge refrigeration system.The low charge refrigerant system is defined as a system with a charge of less than 150 grams and a cooling capacity between 1 kW and 2 kW.The thermal performance model has been developed based on the work by Yin et al (1998) as a finite element approach to thermodynamic modeling.This model emphasizes the heat transfer and pressure drop performance of propane in microchannel heat exchangers.This model has been validated to predict the capacities and COP of the system within ±7.8% and ±8.1% respectively, but usually under predicts the refrigerant pressure drop of the microchannel tubes by 75%.The results shown within this paper illustrate the design of the low charge system, the structure of the thermal model, the validation of the model, and application of the model in the exploration in the variation of the heat exchanger designs.
Authors: M. Hoehne, Pega Hrnjak
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2292416442
