Work

Control of Texturized Silicon Substrates Surface Passivation for a-Si:H/c-Si Heterojunction Solar Cells

Year: 2010
Type: article
Abstract: Surface passivation tests by plasma enhanced chemical vapor deposition of hydrogenated amorphous silicon (PECVD a-Si:H) films were performed on texturized 125 mm pseudo square n-type crystalline silicon (c-Si) wafers to i) develop cleaning processes dedicated to a-Si:H/c-Si heterojunction (HJ) 148 cm2 solar cells and ii) to monitor a HJ pilot line. Implied open circuit voltage (Voc) up to 740 mV and effective surface recombination velocity (Seff) down to 8 cm.s-1, as measured by quasi-stady state photo conductivity decay have been obtained using RCA and HF -based cleaning sequences. This high level of surface passivation allowed a better than 19% conversion efficiency baseline of HJ cells (19.6% best cell). Also, a cost effective and high throughput alternative cleaning, without RCA steps, has been developed using the passivation tests and was validated on HJ solar cells. Similar implied Voc and Seff were obtained while a slight improvement of cell performance was measured. Regarding the HJ line monitoring by passivation tests, a correlation between Voc and Seff of control wafers and cell performance was found, despite the other process steps than the wet ones impact the performance. This allows to some extent the prediction of cell performance and troubleshooting actions on the wet equipments.
Source: EU PVSEC
Authors: Danel, A., Hickel, P.E., Souche, F., Salvetat, T., Letiec, Y., Nolan, T., Ribeyron, P.J.
Language: English
Open Access status: green
OpenAlex ID: W2297377684
FWCI: 0.715
Cites:
Cited by: 3
Related to: 10