Work

Transparent Conductive Oxides for Silicon Heterojunction Solar Cells

Year: 2010
Type: article
Abstract: Silicon heterojunction solar cells passivated with thin amorphous silicon layers allow for very-high open circuit voltages. To achieve very-high efficiency solar cells, front and back transparent conductive oxides play a crucial role too as they serve as electrical contacts, antireflection coating and back surface reflector. In this work, we investigate the optical and electrical behaviour of silicon heterojunction solar cells with different front and back contacts for flat and textured wafers. The front contact consists either of 80 nm of ITO or 5 Cm of LPCVD ZnO and the back contact is either a stack of 50 nm ITO/silver or 1-5 Cm LPCVD ZnO/silver. We observe that for the frontside, on flat wafers, the highest current and fill factor are obtained with rough ZnO while on textured surfaces the best efficiency is obtained with ITO, thanks to the efficient quarter-wavelength antireflection coating combined with pyramidal texture. For the backside on textured wafers, best results are obtained with a stack of 5 Cm ZnO/silver giving superior light trapping and a better fill factor, compared to the ITO/silver stack. Using such a back contact we fabricate heterojunction devices of 2x2 cm2 using printed metallization and reaching Voc of 716 mV and efficiency of 20.1%.
Source: EU PVSEC
Language: English
Open Access status: green
OpenAlex ID: W2311251988
FWCI: 0.238
Cites:
Cited by: 7
Related to: 10