Large Area Thin Film Silicon Solar Cells and Modules on Textured ZnO:Al Front Contacts
Year: 2009
Type: article
Abstract: Applied Materials is developing the next generation of large-area, low-cost silicon thin-film photovoltaics technology. An important element of this program is the development of high-quality transparent conductive coatings. We report here on highly conductive and transparent aluminium-doped zinc oxide (ZnO:Al) films on large area (1.43 m2, Gen5) glass substrates. The films were deposited by magnetron sputtering of ZnO:Al layers from rotatable ceramic ZnO:Al2O3-targets at substrate temperatures above 250°C. Sputtered coatings were wetchemically etched in diluted hydrochloric acid and used as front contacts in amorphous-microcrystalline silicon (a-Si/μc-Si) tandem junction solar cells and modules. The etching process is crucial for the surface texture of the front contact. The etch-time was varied and the influence on the surface texture was analyzed. The impact of this variation on solar cell performance was examined, and the improvement of the light-trapping effect is shown. We prepared a-Si/μc-Si tandem junction (TJ) modules on different types of etched films. Initial powers up to 146 W for TJ Gen 5 (1.43 m²) solar modules were achieved. These values correspond to total area efficiencies before light soaking of 10.2 %.
Source: EU PVSEC
Authors: Obermeyer, P., Repmann, T., Severin, D., Vermeir, I., Schmidt, U.I., Witting, K., Schroeder, J., Müller, J., Kuhrau, N., Kress, M., Schwanitz, K., Klein, S., Wieder, S.
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2311549239
