Chaos Theory Applied to Analyze Tool Wear During Machining of Titanium Metal Matrix Composite (TiMMCs)
Year: 2015
Type: dissertation
Abstract: RESUME
Ma these de doctorat a porte sur le developpement d'une nouvelle methode pour etudier l‘usure de l'outil et de la vie de l'outil lors de l'usinage d‘un composite a matrice metallique de titane (TiMMCs). Ce nouveau materiau offre de nombreux autres avantages par rapport aux alliages de titane conventionnels et les materiaux composites a matrice metallique. Grace a haute resistance, rigidite au fluage a des temperatures elevees, TiMMCs est considere comme un materiau de choix pour des applications dans l'aerospatiale et de l'automobile dans un avenir proche. Toutefois, la combinaison de toutes ces caracteristiques d'usinage d'alliages de titane et des materiaux composites a matrice metallique rend les TiMMCs extremement difficile a usiner tandis que leur usinabilite n‘est pas completement comprise dans la litterature.
Dans des diverses etudes sur l'usure de l'outil trois regions differentes de l'usure des outils ont ete distingues en fonction de l'augmentation de l'outil usure rapport au temps de coupe. Ils sont successivement l‘usure initiale, l‘usure reguliere et la periode d'usure acceleree. Cependant, le phenomene d'usure initiale de l'outil et ainsi que son impact sur la vie de l'outil pendant le processus d'usinage n‘est pas clairement compris. Ce fait peut etre explique en notant que la plupart de ces etudes ont ete focalisees sur la periode de l'usure reguliere qui semble intuitivement etre une bonne methode pour estimer la vie de l‘outil.
Par consequence, dans le but de mieux comprendre le phenomene de l'usure de l'outil initiale et ses influences sur la vie de l'outil, le comportement initial de l'usure de l'outil pendant l'usinage de TiMMCs a ete considere dans le cadre de ma these. Les resultats obtenus nous ont montre que l'usure se produit des le premier instant de l‘usinage. Cette usure speciale se prolonge jusqu‘a seulement dix secondes au maximum. Tel usure initiale est le resultat de plusieurs procedes compliques tels que les dommages de la couche du revetement, la friction – tribologique, la diffusion et l‘adherence. La basse conductivite thermique et une grande reactivite des alliages de titane conduisent a la deformation plastique et a la formation d'un built-up-edge (BUE) a des temperatures elevees dans toutes les conditions experimentales effectuees dans la premiere (ou initiale) zone d‘usure. Ce mecanisme d'usure est en effet oppose a celui de l'abrasion de la periode de l'usure reguliere.----------ABSTRACT
This research work focused on developing a new method to investigate the tool wear and tool life during machining of titanium metal matrix composite (TiMMCs). That novel generation material offers many other advantages compared to titanium alloys and metal matrix composites. Due to high strength, high stiffness, and creep resistance at high temperatures, TiMMCs is considered as a material of choice for applications in aerospace and automotive industries in the near future. However, the combination of all the hard machining characteristics of titanium alloys and metal matrix composites makes the TiMMCs an extremely difficult to cut material while their machinability is still not fully understood in the open literature.
In various studies on tool wear and tool life, three distinctive regions of tool wear have widely been classified according to the increase of tool wear versus cutting time. They are the initial wear, steady wear and accelerated wear periods. However, the initial tool wear phenomenon and its influence on the tool life are not yet clearly understood. This fact can be explained by noting that most of these studies have been performed within the steady wear period which intuitively seems to be the right method to handle tool life problem.
Accordingly, with the aim of contributing to a better understanding of the initial tool wear phenomenon as well as how it affects to the tool life, an investigation on initial tool wear behavior during machining of TiMMCs has been conducted in this thesis. The results have shown that the initial wear occurs at the first instant and extends to only ten seconds at the most; it is a result of complicated mechanisms such as coating layer damage, friction - tribological wear diffusion and adhesion. The low thermal conductivity and high reactivity of titanium alloys lead to plastic deformation and forming of a built-up-edge (BUE) at elevated temperatures under all experimental cutting conditions in the first or initial, wear zone. This wear mechanism is indeed opposite to the wear mechanism of abrasion found in the steady wear period.
More importantly, by analyzing the wear mechanism at the first transition wear period we report herein a new wear form. The effect of chemical stresses under high cutting force and high temperatures was the main reason for the resulting diffusion wear; the by-products of that cutting process can spontaneously react with atmospheric oxygen. These oxidized titanium and aluminum based materials then diffuse from the coating layer and the TiMMCs at high pressure and elevated temperature.
Author: Xuan Truong Duong
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2341170442
