Work

Friction/Wear Properties of Magnetron Sputtered High-hard SiC Films on Ti6Al4V Alloy

Year: 2013
Type: article
Abstract: High-hard SiC film was developed on Ti6Al4V alloy using magnetron sputtering technique at room temperature,and its microstructure,nanoindentation and friction/wear properties were investigated.The results show that the SiC films were amorphous and exhibited the nano-hardness of 26.8GPa and the elastic modulus of 229.4GPa.As sliding against Si3N4 ball(2mm in radius) using ball-on-disc type wear tester under Kokubo SBF at room temperature,the SiC films exhibited the special wear rate in the magnitude order of 10-5 mm3 m-1 N-1 and the friction coefficient of about 0.173 and 0.280 at the load of 50g and 200g.The higher friction coefficient is primarily due to itself breakage of the SiC films.
Author: Xiaojing Xu
Institution: Jiangsu University
Language: English
Open Access status: gold
Estimated APC paid: $581
OpenAlex ID: W2390430420
FWCI:
Cites:
Cited by:
Related to: 10