Year: 2015
Type: dissertation
Abstract: he development of multijunction solar cells is a promising approach to increase the efficiency of silicon thin-film photovoltaics. The objective of this work is to investigate how to optimise a high bandgap top cell and if the use of hydrogenated amorphous silicon alloys (a-SiO:H, a-SiC:H) as absorber materials is reasonable. According to the simulation results of this work, hydrogenated amorphous silicon (a-Si:H) is the preferable top cell absorber material for a triple cell. However, for a quadruple cell, amorphous silicon alloys (a-SiO:H, a-SiC:H) with a higher bandgap of 2.08 eV are beneficial as top cell absorbers. Methane (CH4) and carbon dioxide (CO2) were used as alloying source gases. Intrinsic amorphous silicon carbide layers produced with CH4 show better single layer and cell properties than intrinsic amorphous silicon oxide layers produced with CO2. Employing CH4 in the i-layer, a single cell open circuit voltage of 1 V is achieved. In summary, the optimum top cell absorber for a quadruple stack should have a bandgap of 2.08 eV and be made of amorphous silicon carbide with high hydrogen and low carbon content.
Author: Walder , Cordula
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2488595170
