The elements of electrical engineering; a text book for technical schools and colleges. Vol. I. Direct current machines; electric distribution and lighting, by William Suddards Franklin and William Esty.
Year: 1907
Type: book
Abstract: Non-standard symbols which are used but once or twice in this treatise are not given in this table.The significance of such symbols is fully explained whenever and wherever they are used.Xii CLASSIFICATION AND NOTATION.¢in some places represents temperature and at another place it may stand for an interval of time.The meanings of these symbols are explained every time an equation is discussed in the text, and therefore symbols that are used only once or twice in the text are not given in this table . .a, 8, >, @ are used for angle; 8 is also used for temperature coefficient of resistance, and for coefficient of linear expansion.& magnetic flux density.° C capacity.E, e electromotive force or voltage.£, = electromotive force induced in an armature.f£,, = electromotive force between the terminals ot -a dynamo.J frequency of an alternating electromotive force or current in cycles per second.The letter / is also used for electric field intensity.F force ; sometimes used for field loss of a dynamo.F magnetomotive force.H quantity of heat expressed in ergs or joules.h conical intensity of a beam of light in hefners or in candles.# magnetic field intensity.J, @ current.| 7, =armature current, /,=shunt field current.J, =series field current, /,= current in external circuit.:The letter 7 is also used for the sectional intensity of a beam of light, or for intensity of illumination.J intensity of magnetization.& inductivity of a dielectric, L inductance.Z length.m magnetic pole strength, # magnetic permeability.CLASSIFICATION AND NOTATION.xili mz speed in revolutions per minute or in revolutions per second.This letter is frequently used where any number of things, 7, are to be represented in a formula.P power.p number of field magnet poles of a dynamo.The letter Z is also used for power factor.pf' number of current paths in an armature.®, ¢ magnetic flux.Q, 7 quantity of electric charge.R, rv resistance.R,= armature resistance, R, = shunt field resistance, X, = series field resistance.& magnetic reluctance.p specific resistance.s area of a surface, sectional area.S stray power loss in a dynamo.' ¢ time; also temperature, T torque.v linear velocity.@ angular velocity.W work. X,% reactance.The letter x is also frequently used as a coordinate.Z, 2 impedance.The letter Zis also used for the number of conductors on the surface of an armature, and for the number of turns of wire in a coil.The letter z is also used for the number of turns of wire per unit length of a coil.| Z' = pZ/p' 10° where Z is the number of conductors on the surface of an armature.
Source: Macmillan eBooks
Author: William S. Franklin
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W2492134637
