Work

Solvent extraction of Cu(II) by purified cyanex 272

Year: 2007
Type: article
Abstract: The solvent extraction of Cu(II) from 0.10 mol/dm 3 sulphate medium by purified cyanex 272 (bis-2,4.4-trimethylpentylphosphinic acid, BTMPPA, H 2 A 2 ) dissolved in distilled aliphatic kerosene has been investigated. The equilibration time is less than 15 min. The distribution ratio is found to decrease appreciably with equilibrium Cu(II) concentration in the aqueous phase, particularly, at its higher concentration region indicating some sort of association of Cu(II) species in either of the phases. The pH and the extractant concentration dependences on distribution ratio are 1 and 1.2, respectively. The distribution ratio is almost independent of sulphate ion concentration in the aqueous phase. The ΔH value is 27.3 ± 0.5 kJ/mol. The 60% extraction equilibrium reaction is suggested to be: CuHSO 4 + H 2 A 2 (o) = CuHSO 4 A. 0.5 H 2 A 2(O) + H + and some 40% extraction is likely to occur via the reaction, CuHSO 4 + + 1.5 H 2 A 2(o) = CUHSO 4 A.H 2 A 2(o) + H + satisfying the extractant dependence of 1.20. The apparent extraction equilibrium constant (K ex ) is estimated to be 10 -3 15. The loading capacity of BTMPPA is 13.47 g Cu(II)/100 g BTMPPA. Among H 2 SO 4 , HCl and HNO 3 solutions as stripping agent, 1 mol/dm 3 H 2 SO 4 solution is found to be the best; 99.6% Cu(II) in the organic phase can be stripped off in three stages (O/A = 1 in each stage). The Cu(II) distribution ratio measured at pH = 4 in different diluents does not show good correlation with the cross-sectional area of BTMPPA molecules at interfaces formed by different diluents at pH 0.80.
Language: English
Open Access status: diamond
OpenAlex ID: W2497018055
FWCI: 0.871
Cites: 1
Cited by: 17
Related to: 10