Work

Removal of Perfluorinated Compounds by Anion Exchange: Factors Affecting Resin Performance and Regeneration.

Year: 2014
Type: article
Abstract: Perfluorinated compounds (PFC) are organic compounds in which all carbonhydrogen bonds are replaced with carbon-fluorine bonds.PFCs are used in the production of stain repellants, non-stick coatings, and firefighting materials.Two important PFC classes are perfluorocarboxylic acids (PCAs) such as perfluorooctanoic acid (C8, PFOA) and perfluorinated sulfonic acids (PSAs) such as perfluorooctane sulfonate (PFOS).C8 and PFOS are the most commonly studied PFCs because of their toxicity, persistence, and long half-lives in humans.The EPA issued a drinking water Provisional Health Advisory for C8 and PFOS at 0.4 and 0.2 μg/L, respectively.Apart from C8 and PFOS, a wide range of additional PFCs have been detected in drinking water sources.Both PCAs and PSAs are strong acids and therefore occur predominantly in anionic form at common water treatment pH values.Objectives of this research were to (1) assess the effectiveness of a magnetic anion exchange resin for the removal of seven PCAs and three PSAs, and (2) identify regeneration strategies that effectively restore the PFC uptake capacity of the spent anion exchange resin.Batch and sequential loading experiments were conducted to identify factors that affect the removal of seven PCAs and three PSAs.A commercially available magnetic anion exchange resin certified for drinking water treatment was evaluated.The selected strong base anion (SBA) exchange resin has a polyacrylic, macroporous matrix and contains quaternary amine groups as ion exchange sites.Experiments were conducted in salt-amended ultrapure water and in two drinking water sources that were spiked with 500 ng/L of each PFC.The effects of dissolved organic matter (DOM), solution pH, and ionic strength on PFC removal were assessed.Resin regeneration was evaluated in batch tests, and factors such as regenerant anion type, pH, and solvent matrix were investigated.PFC uptake increased with increasing perfluorinated carbon-chain length, and PSAs were more effectively removed than PCAs.At typical resin operating conditions (500-1,000 bed volume equivalents), removal of perfluorobutanoic acid (C4) ranged from ~30-55% while that of PFOS exceeded 95%.Solution pH and DOM had a negligible effect on PFC removal, but PFC removal decreased with increasing ionic strength.At equivalent concentrations, the effect of individual anions on PFC removal generally was bicarbonate < chloride < sulfate < nitrate for PCAs and bicarbonate < chloride ~ sulfate < nitrate for PSAs. DEDICATIONQuiero dedicar esta tesis a mis papás, Martha y Luis, por apoyarme y amarme incondicionalmente; y a Juan por estar siempre en mi corazón.(I would like to dedicate this thesis to my parents, Martha and Luis, for supporting and loving me unconditionally; and to Juan for always staying in my heart.
Language: English
Open Access status: green
OpenAlex ID: W2506982570
FWCI: 0.173
Cites: 52
Cited by: 5
Related to: 10