Work

Evaluation of the potential to estimate river discharge using measurements from the upcoming SWOT mission

Year: 2013
Type: article
Abstract: This study focuses on evaluating the potential of upcoming Surface Water and Ocean Topography (SWOT) mission (planned for 2020) to develop improved estimates of river discharge.Three series of experiments are designed to achieve the research goal of estimating river discharge.First, a river model is developed to provide channel hydraulic characteristics of the Ohio River Basin on a daily scale.The LISFLOOD-FP hydraulic model is used for the river modeling work.For the modeling effort, measurements from USGS stream gages on 19 of the Ohio River tributaries are used as boundary conditions and validation data.The cross-sectional data are derived from the U.S. Army Corps of Engineers data.Overall, the modeled discharge matches well with the observed discharge with a normalized root mean square error (NRMSE) of 22.3% and a correlation coefficient of 0.94.Second, a data assimilation scheme coupled with a hydraulic model is implemented to estimate river bathymetry for retrieving river discharge from the SWOT data.Here, a local ensemble batch smoother (LEnBS) algorithm takes into account the hydraulic model and SWOT observations, providing optimal estimates of river bathymetry and discharge.The synthetic SWOT observations are generated by corrupting the 'true' LISFLOOD-FP modeling results with the instrument error.For the 'open-loop' simulation, the first-guess of the boundary conditions are produced by the Variable Infiltration Capacity hydrologic model, with discharge uncertainty controlled via precipitation uncertainty.Bathymetry estimates are initially derived from SWOT iii observations, assuming a uniform spatial depth with spatially-correlated downstream variability.The LEnBS recovers the bathymetry from SWOT observations with a 0.52 m reach-average RMSE, which is 67.8% less than the first-guess RMSE.The RMSE of bathymetry estimates decreases sequentially, as more SWOT observations are used in the estimate.The NRMSE of the river discharge estimates is 10.5%, which is a 71.2% improved accuracy compared with the first-guess error.Last, a spatiotemporal interpolation method is presented to estimate water height for times without SWOT observations.Here, a local space-time ordinary kriging (LSTOK) method is utilized to address the variances of the river depth in the space and time domain.Two data sets of synthetic SWOT observations are used as inputs.One data set is simulated from modeled river height via the LISFLOOD-FP model and the other data set is generated from the USGS gage measurements.The model-based experiment shows the LSTOK recovered the river heights with a mean spatial and temporal RMSE of 11 cm and 12 cm, respectively.These accuracies show a 46% and 54% improvement, compared to the RMSEs of the linear interpolation estimates.The gage-based experiment shows a temporal RMSE of 32 cm on average, which is a 23% improvement over the linear interpolation estimates.The degradation in performance of the LSTOK for the gagebased analysis, as compared to the model-based analysis, is apparently due to the effects of human management on river dynamics.Overall, each experiment presents methods to calculate estimates of river discharge from the future SWOT observations.This will be important to address the primary SWOT mission goals of estimating river discharge directly from SWOT observations.
Author: Yeosang Yoon
Language: English
Open Access status: green
OpenAlex ID: W2524666439
FWCI:
Cites: 92
Cited by: 1
Related to: 10