Bandgap engineering of Cu(In_1-xGa_x)Se_2 absorber layers fabricated using CuInSe_2 and CuGaSe_2 targets for one-step sputtering process
Year: 2016
Type: article
Abstract: We have demonstrated that the bandgap of Cu(In 1-x Ga x )Se 2 (CIGS) absorber layers was readily controlled by using a one-step sputtering process.CIGS thin-film sample libraries with different Ga/(In + Ga) ratios were synthesized on soda-lime glass at 550°C using a combinatorial magnetron sputtering system employing CuInSe 2 (CIS) and CuGaSe 2 (CGS) targets.Energy-dispersive X-ray fluorescence spectrometry (EDS-XRF) confirmed that the CIGS films had different Ga/(In + Ga) ratios, which were varied by the sample configuration on the substrate and ranged from 0.2 to 0.9.X-ray diffraction and Raman spectroscopy revealed that the CIGS films had a pure chalcopyrite phase without any secondary phase such as Cu-Se or ordered vacancy compound (OVC), respectively.Furthermore, we found that the optical bandgap energies of the CIGS films determined by transmittance measurements ranged from 1.07 eV to 1.53 eV as the Ga/(In + Ga) ratio increased from 0.2 to 0.9, demonstrating that the one-step sputtering process using CIS and CGS targets is another simple route to control the bandgap energy of the CIGS absorber layer.
Source: Optical Materials Express
DOI: 10.1364/ome.6.003541
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,843
Awards: G440252240, G4427154788, G4785159920
OpenAlex ID: W2535881117
