Year: 2017
Type: dissertation
Abstract: This thesis is comprised of my original contribution to the development of the bio-based material poly(limonene carbonate) (PLimC).There is a huge need for such polymeric materials based on natural resources as the supply of fossil feedstocks is limited and it is going to cease within this century.--s can only succeed if the performance of the green material can compete with or even excel that of the established polymers.The latter is true for PLimC and thus I have dedicated my entire thesis to this material.Within the family of such bio-based plastics, PLimC takes a special role as it is the copolymer of ( oxidized) limonene (LO) a by-product of the orange industry and CO2.To incorporate this abundant greenhouse gas into a polymeric backbone is a field of research itself but in the case of PLimC this is only a side note.The real excitement to work with this material arises from its properties and the vast diversity of its modifications.The discussions of the development, applications and modifications of PLimC are outlined in dedicated chapters within this thesis (Chapters 3-5).The discussion starts with the development of the material from a low-molecular-weight polymer into a high-molecular-weight engineering thermoplastic in Chapter 3. The chapter deals with the synthetic strategies towards a controlled and economical properties.The control of the molecular weight of PLimC was found to be crucially dependent on the composition of the monomer LO, which is inherently contaminated with hydroxy-carrying molecules.These impurities act as chain transfer agents in the Zn(II)catalyzed copolymerization and thus keep the molecular weight of PLimC low.The treatment of LO with an O-methylating agent was found to quantitatively mask those alcohols as an enabler to yield high molecular weights of PLimC (>100 kDa).These long chains give the material the mechanical integrity to be processed into fibres, films or sheets that can withstand external stress.The economical aspect is covered by a stereo-and regioselective synthesis of the trans isomer of LO as the catalyst rejects to incorporate the cis isomer into the backbone of PLimC.The epoxidation of limonene would usually yield a 1:1 mixture of cisand trans-LO but the detour via the bromohydrin and the subsequent Abstract viii ring-closure in basic environment gives trans-LO (>95%) as the major product.This transenriched monomer is successfully coupled with CO2 in high conversions to give PLimC with little residual epoxide.The resulting amorphous thermoplastic exhibits high heat-(Tg of 130 °C) and scratch-resistance with an extraordinary transparency (94%), which render it a potential coating or glazing material.This application of PLimC as a glazing material s in terms of breathability and membranes are introduced.The concepts are based on the very high permeability of PLimC for gases like O2 and CO2 (12 and 68 barrer, respectively).Together with the exceptional optical and mechanical properties, PLimC constitutes the first polymeric glass with the ability to breathe.Such a breathing glass is still a very good thermal insulator and thus can be utilized as window panes in well-insulated constructions (e.g. in passive houses or closed greenhouses) to supply the interior with fresh air.The advantage of this passive exchangeof air is the avoidance of an active ventilation system that has to be accessorily equipped with a heat exchange unit to reduce heat losses due to the introduction of cold fresh air.In case of PLimC as the breathing glass, the transport of fresh air is realized through the polymer matrix while the transport of heat is hindered due to the low thermal conductivity of material (0.15 W K -1 m -1 ).According to our calculations, such a breathing glass made of PLimC cannot replace the entire ventilation system yet but it can already compensate for a part of the ventilation and thus save energy.Further improvements of the material and its processing are envisioned to replace the active ventilation systems eventually.Another application of PLimC arises from the fact, that the material shows not only a high permeability of CO2 but also a distinct selectivity for the gas over N2.The development of polymeric membranes for gas separation processes is a rapidly growing field as carbon capture (removal of CO2 from process gases) is one of the technologies that is anticipated to abate the anthropogenic greenhouse effect.Here, PLimC is a potential candidate to be applied in gas separation units due to its good separation characteristic but moreover due to its above-mentioned mechanical toughness and thermal resistance that should give it the long-term stability and processability most state-of-the-art polymeric membrane materials lack.
Author: Oliver Hauenstein
Institution: University of Bayreuth
Language: English
Subfield: Biomaterials
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
Funder: Deutsche Forschungsgemeinschaft
OpenAlex ID: W2592091529
