Work

Deformation and Durability Studies of Insulation Polymers

Year: 2008
Type: article
Abstract: Insulation polymers are not well characterized for their mechanical properties particularly in terms of fatigue strains.This research aims to examine the durability and fatigue lives of insulation polymers, viz., (1) Polyvinyl Chloride (PVC), (2) Crosslinked Polyethylene (XLPE) and (3) Polyphenylene Ether (PPE) under selected strain and temperature ranges.The tensile properties of these materials were measured using an Instron testing machine at constant and controlled loading rates.Fatigue tests were performed at three selected temperatures: -40 °C, 25 °C and 65 °C to characterize the temperature effects on fatigue life.From the tensile test results, it was observed that PVC and XLPE tend to be more ductile and exhibits more elongation prior to breaking, while PPE exhibits brittle behavior.When the loading rate is increased, there was an improvement in the tensile strength of PPE and elastic modulus of PPE and PVC.The durability of XLPE under tensile fatigue testing was largest, followed by PVC and PPE.The fatigue life of PVC and XLPE decreased drastically at -40 °C and demonstrated a rapid increase at 65 °C compared to fatigue life at room temperature.This trend was not observed in PPE where the fatigue life showed improvement at both lower and higher temperatures.ideas of my advisor Dr. Shing-Chung Wong.His guidance and experience had greatly helped this thesis and my learning in the field of Mechanical Engineering.I would like to express my gratitude to The College of Engineering for providing
Authors: Bandaru Venkata Raghava, Sunil K. Reddy
Institution: University of Akron
Language: English
Open Access status: green
OpenAlex ID: W2603353009
FWCI:
Cites: 60
Cited by: 4
Related to: 10