Work

Synthesis of monodisperse FePt nanoparticles by pulsed laser ablation

Year: 2014
Type: article
Abstract: The continuous drive to further miniaturization is one of the basic research and development goals in industry producing data processing and storage devices, for reasons of economy, performance and energy minimisation. Modern magnetic hard drives have storage densities of hundreds of GBits / in² , but future storage devices are required to reach values of over 1 TBits/ in² . Ideally, a single domain magnetic nanoparticle could represent a single data bit. A main issue for reaching this is the thermal stability of magnetisation if the superparamagnetic limit is reached. Therefore, a high uniaxial magnetic anisotropy above J/m³ is needed which prohibits thermal fluctuations of magnetisation at ambient temperatures and thus loss of data. The most promising material is the bimetallic alloy FePt which offers large magnetic anisotropy due the presence of the ordered face centered tetragonal -phase due as a result of the presence of different atomic radii of Fe and Pt. In the frame of this objective a synthesis process by means of the physical approach of evaporation and recondensation in the gas phase was developed and optimized. Thereby ns-Pulsed Laser Ablation was applied on a FePt rod inside a vacuum-tight facility in order to generate a bipolarly charged aerosol consisting out of nitrogen as inert carrier gas and FePt nanoparticles. For the purpose of investigating the magnetic properties of FePt nanoparticles the aerosol was passed through a custom-built Differential Mobility Analyzer for size selection. In the following, monodisperse aerosol was annealed by means of a tube furnace with the requirement of creating spherical and mainly - ordered FePt nanoparticles with a minimum of particle losses. Analysis and quality check of the obtained nanoparticles was executed by means of number size distributions with a Scanning Mobility Particle Sizer (SMPS), HR(S)TEM evaluation for investigating monodispersity and -fraction with help of Rietveld refinement, EDX for obtaining the stoichiometry of ablated material and Super conducting Quantum Interference Device (SQUID) measurements for evaluating magnetic properties. Sample preparation was done with a custom-built Low Pressure Impactor (LPI) and a condensation particle counter (CPC) which offers a controlled film formation. It was possible to generate monodisperse, stoichiometrically preserved and spherical FePt nanoparticles at a laser wavelenght of 355 nm and a fluence of 0.895 J/cm² with particle diameters of 5, 10 and 15 nm and geometric standard deviations well below 1.10, which had an increasing fraction in - phase up to 82 % with increasing sintering temperatures from 1173 K up to 1473 K. With increasing particle size one observes an increasing fraction of crystal defects and especially multiple twinned nanoparticles originated from coagulation and sintered primary particles in the size order of 5 nm. Although the larger nanoparticles have a larger - fraction, one can find excellent ferromagnetic hysteresis loops with high coercivity in the case of the smallest particle. One reason can be the polycrystalline appearance at bigger particle diameter and the different orientation of the easy magnetic axis in the crystallites which form overall a weaker magnetic moment. Therefore, 5 nm FePt nanoparticles offer the best perspective for future storage media and laser ablation is a promising alternative next to other physical or chemical processes. Additionally, high uniaxial anisotropy constants (> J/m³ for 5 nm FePt; > J/m³ for 10 nm FePt; > J/m³ for 15 nm FePt) could be found experimentally possibly offering a stable state of magnetisation.
Language: English
Open Access status: green
OpenAlex ID: W2622463238
FWCI: 0.12
Cites: 224
Cited by: 1
Related to: 10