Year: 2013
Type: dissertation
Abstract: This thesis describes two design ideas in the area of ADC-based receivers. The first contribution of thesis is a 10Gb/s blind baud-rate CDR. The blind baud-rate operation, which is made possible by using a 2UI integrate-and-dump filter, creates intentional ISI in adjacent bit periods. The blind samples are interpolated to recover center-of-the-eye samples for a speculative Mueller-Muller PD and a 2-tap DFE operation. The 65nm CMOS test chip has a measured high-frequency jitter tolerance of 0.19UIPP at -/+300ppm of frequency offset. The second contribution of this thesis is a digital zero-forcing adaptive DFE. The DFE coefficients are calculated by correlating data samples with the recovered bits. Simulations show that the adaptive taps converge to the ISI values on the pulse response of the data signal. The CDR and adaptive 2-tap DFE have a high-frequency jitter tolerance of 0.28UIPP when simulated at 10Gb/s with an 8" FR4 channel.
Source: TSpace (University of Toronto)
Author: Clifford Ting
Institution: University of Toronto
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2735483040
