Process development and metabolic engineering to enhance 2,3-butanediol production by Paenibacillus polymyxa DSM 365
Year: 2017
Type: article
Abstract: 2,3-Butanediol (2,3-BD) is a platform chemical with vast industrial applications; particularly for its use in the production of 1,3-butadiene (1,3-BD), the monomer from which synthetic rubber is manufactured.Currently, 2,3-BD production is by chemical synthesis using petroleum-derived feedstocks such as propylene, acetylene, butene and butane.Microbial 2,3-BD fermentation is aimed at producing 2,3-BD renewably, and potentially reduce dependency on finite petroleum-derived feedstocks.However, fermentative production of 2,3-BD is hampered by (1) cost of food-based substrates; (2) low 2,3-BD titer, yield and productivity during 2,3-BD fermentation stemming from formation of competing products such as exopolysaccharides (EPS), ethanol, lactic, formic and acetic acids; and (3) high cost of 2,3-BD purification, due partly to additional purification steps necessary to remove 2,3-BD co-products especially EPS prior to 2,3-BD recovery.The objectives of this study were conceived to examine use of process design, alternative substrates and metabolic engineering, to enhance 2,3-BD production.Chapter 3 (objective 1) focused on identification of key fermentation parameters that influence 2,3-BD fermentation by Paenibacillus polymyxa and optimization of them for maximum 2,3-BD production.The study examined the impact of yeast extract, tryptone, ammonium acetate, ammonium sulfate, and crude glycerol concentration, and inoculum size and fermentation temperature on 2,3-BD production by P. polymyxa.The iii results showed that only three parameters (tryptone, temperature and inoculum size) had significant effects on 2,3-BD production by P. polymyxa.The three factors were optimized and 2,3-BD production by P. polymyxa increased from ~27 g/L to 51.1 g/L in batch bioreactor cultures and from 47 g/L to 68.5 g/L in fed-batch cultures.The improvement in 2,3-BD production by P. polymyxa was accompanied by 11% and 19% reduction in ethanol and EPS formation, respectively, when compared to the unoptimized fermentation medium and conditions.Due to the inability of P. polymyxa to produce more than 6% 2,3-BD in fed-batch cultures, and the attendant increase in the accumulation of acetoin (the precursor from which 2,3-BD is biosynthesized) in the bioreactor, chapter 4 (objective 2) focused on understanding 2,3-BD-mediated feedback inhibition during 2,3-BD fermentation.This study evaluated the response of P. polymyxa to high 2,3-BD concentrations during growth and 2,3-BD fermentation.Cultures of P. polymyxa were challenged with levo-2,3-BD (20, 40 and 60 g/L) at 0 h fermentation in a glucose medium.The inhibition of P. polymyxa growth by levo-2,3-BD was concentration dependent, triggering total growth inhibition when the concentration of 2,3-BD attained 60 g/L.Furthermore, when P. polymyxa was challenged with incremental 2,3-BD concentrations (20, 40 and 60 g/L at 12, 24 and 36 h, respectively) to mimic 2,3-BD accumulation during fermentation, 2,3-BD was reconverted to acetoin when its concentration reached 60 g/L, possibly to alleviate 2,3-BD toxicity.Chapter 5 (objective 3) evaluated the feasibility of using readily available nonfood lignocellulosic biomass (LB) as substrate for 2,3-BD fermentation.Pretreatment of LB to release fermentable sugars is accompanied by the generation of lignocelluloseiv derived microbial inhibitory compounds (LDMICs) such as furfural, hydroxymethylfurfural (HMF), and phenolic compounds which inhibit growth and pose a significant roadblock to LB use as substrates.The study investigated the ability of P. polymyxa to use LB-based agricultural residue, wheat straw hydrolysate (WSH), for the production of 2,3-BD.Prior to testing the fermentability of WSH to 2,3-BD, the ability of P. polymyxa to co-metabolize the representative mixed sugars (glucose, xylose and arabinose) of WSH was evaluated.The results show that P. polymyxa simultaneously co-metabolized the mixed sugars (glucose, xylose and arabinose) component of LB to 2,3-BD without exhibiting signs of carbon catabolite repression characteristics.Batch fermentations conducted using 60%, 80%, and 100% WSH, and a glucose-based control, showed that the growth of P. polymyxa increased 17%, 27% and 32% in 60%, 80% and 100% WSH, respectively, relative to the glucose control medium.2,3-BD production in 60%, 80% and 100% WSH was 32, 31 and 23 g/L, respectively, which was comparable to the 32 g/L obtained in the glucose-based control.The enhanced growth in WSH suggests that P. polymyxa might have sequestered additional carbon from LDMICs.Hence, the ability of P. polymyxa to use LDMICs as sole carbon sources was investigated.The growth of P. polymyxa in HMF increased 2.4-fold relative to the control with no carbon source which suggested that P. polymyxa might have utilized HMF in WSH for cell biomass accumulation.In addition, P. polymyxa showed robust tolerance to furfural and phenolic compounds (coumaric acid, vanillic acid and vanillin) during fermentation.Chapter 6 (objective 4) explored a metabolic engineering strategy to deactivate the EPS production pathway of P. polymyxa and drastically reduce or eliminate EPS Dr. Ezeji specially for providing me the privilege and opportunity to conduct research under his mentorship.Dr. Ezeji offered me impeccable support through difficult times, research wise and offered me a research assistantship for over three years, which allowed me grow as a scientist.The training
Author: Christopher Chukwudi Okonkwo
Institution: The Ohio State University
Language: English
Subfield: Molecular Biology
Domain: Life Sciences
Open Access status: green
OpenAlex ID: W2766186468
