Electrochemistry of the Sulfide/polysulfide Couple
Year: 1983
Type: article
Abstract: The redox behavior of solutiors containing sodium sulfide and sodium polysulfide was investigated using a platinum wire electrode.We determined that contrary to published literature, the equilibrium potential of the sulfide/polysulfide redox couple does have a pH-sensitive component.Experimental results indicate that platinum is not a good electrocatalyst for this couple, but that upon anodization a layer is formed on the surface of the platinum that imparts a reasonable catalytic activity to the electrode.A mechanism is proposed based on present results and past literature that accounts for most if not all of the observed phenomenon.This proposed mechanism predicts that electronically conducting materials that contain sulfur as part of their chemical composition, specifically CoS, NiS, CuS, PbS, and MoS 2 , should be excellent electrocatalysts for both anodic and cathodic reactions.This is confirmed for CoS, CuS, and PbS by the published work of Hodes !! al. 4 This present work extends the range of materials investigated to include NiS and MoS2 and two alternative methods for preparing sulfided electrodes.Experimental results indicate that MoS 2 is the preferred electyrocatalyst for the sulfide/polysulfide redox couple and that a relatively inexpensive composite electrode can be fabricated using 10% MoS 2 , 80% carbon black, and 10% Teflon 30.
Authors: R.J. Remick, E.H. Cámara
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2775364018
