Work

Blistering of magnetron sputtered thin film CdTe devices

Year: 2017
Type: conference-paper
Abstract: Magnetron sputtering is an industrially scalable technique for thin film deposition. It provides excellent coating uniformity and the deposition can be conducted at relatively low substrate temperatures. It is widely used in the manufacture of solar modules. However, its use for the deposition of thin film CdTe devices results in unusual problems. Blisters appear on the surface of the device and voids occur in the CdTe absorber. These problems appear after the cadmium chloride activation treatment. The voids often occur at the CdS/CdTe interface causing catastrophic delamination. This problem has been known for more than 25 years, but the mechanisms leading to blistering have not been understood. Using High Resolution Transmission Electron Microscopy we have discovered that during the activation process, argon trapped during the sputtering process diffuses in the lattice to form gas bubbles. The gas bubbles grow by agglomeration particularly at grain boundaries and at interfaces. The growth of the bubbles eventually leads to void formation and blistering.
Language: English
Open Access status: green
OpenAlex ID: W2775531506
FWCI: 1.386
Cites: 11
Cited by: 8
Related to: 10