Year: 2018
Type: dissertation
Abstract: Developing a successful strategy to enhance the linearity and sensitivity in wearable self-powered motion sensor is crucial to accelerate the commercialization for restoring tactile sense to people with skin damage. This electronic skin is the mimicry of human skin’s sensory ability using electronics, there are various electronic sensors such as pressure, strain, temparature sensors with the detection of various type of senses in the e-skin. Various researches about motion sensitive e-skin have reported highly sensitive pressure sensors that can detect the motion by utilizing capacitive, piezoresistive, tribo/piezoelectric and optical sensing technologies. Among several sensing technologies, capacitive motion sensors which transduce applied pressure into an capacitance between two electrodes have been studied because of long-term stability, low power consumption and fast response and recovery time. However, the sensitivity of sensor by utilizing capacitance is lower than that of piezoresistive motion sensor due to low change of dielectric constant and thicness of pressure responsive material such as elastomer. Recently, a new type of power generating device, named as triboelectric nanogenerator (TENG), based on contact electrification effect and electrostatic induction, was suggested. In the nanogenerator, energy generation is achieved by the charges transfered by a periodic physical contact between two materials that differ in the polarity of triboelectricity. Since 2012, TENGs have been successfully demonstrated as one of promising energy harvesting technologies for self-powered devices such as voice recognition, distress signal emitter, trace memory system, velocity sensor and self-electroplating technology. Firstly, we fabricate the silk fibroin-based biodegradable composite-type self-powered sensors for implantable application. The 2D thin film- and 1D wire-type composites consist of the well-dispersed lead-free ferroelectric (BaTiO3, ZnSnO3, Bi0.5(Na0.82K0.18)0.5TiO3, and K0.5Na0.5Nb0.995Mn0.005O3) nanoparticles. Ag nanowires are used to enhance the dispersion of the nanoparticles and polyvinylpyrrolidone prevents Ag nanowires from connecting with each other. The properties of water-soluble composite films are also controlled with the glycerol content up to 2 days. For developing wearable self-powered textile, we also develop the highly stretchable two-dimensional fabrics by weaving fibers for fabric-structured triboelectric sensor. The fibers mainly consist of Al wires and polydimethylsiloxane (PDMS) tubes with high-aspect-ratio nanotextured surface with vertically aligned nanowires. The fabrics were produced by interlacing the fibers, which was bonded to a waterproof fabric for all-weather use for fabric-structured sensor. It showed a stable high output voltage and current of 40 V and 210 μA, corresponding to the instantaneous power output of 4 mW. The fabric-structured sensor also exhibits high robustness behavior even after 25 % stretching, enough for use in smart clothing applications and other wearable electronics. For wearable applications, the self-powered sensor was successfully demonstrated in applications for foot-step driven large-scale self-powered mat sensor during walking and self-powered bending sensor attached to the elbow. Using capacitive sensing technique, we also fabricate multi-scale mesoporous structured dielectric based capacitive pressure sensor with gradually increasing pore sizes along the longitudinal direction by the gravitational control using high speed rotation. A biocompatible and stretchable mesoporous dielectric layer is used, resulting in pressure sensor with high sensitivity, linearity and high stable property over 10,000 cycles and extremely low-pressure detection of 2 Pa. The strain sensitivity of the sensors differs according to the bending direction due to multi-scale mesoporous structure. Additionally, the resulting pressure sensors are demonstrated to fabricate the artificial finger thus achieving successful tactile sensing of various motion. The developed high-performance electronic skin may open new opportunities for innovative application such as health monitoring and human-machine interfaces.
Author: Kyeong Nam Kim
Institution: Ulsan National Institute of Science and Technology
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2887220218
