Work

Catalytic Upgrading of Waste Oils to Advanced Biofuels – Deactivation and Kinetic Modelling Study

Year: 2018
Type: article
Abstract: The demand for liquid hydrocarbons as transportation fuels is enormous and ever growing.Advanced biofuels is one of the promising solutions to keep pace with the global transitionto cleaner energy by reducing greenhouse gas emissions from the transport sector. It ispossible to selectively remove oxygen from waste oils like tall oil, used cooking oil etc. viaa catalytic hydrodeoxygenation (HDO) process to produce advanced biofuels. Thesebiofuels have similar molecules as in the traditional fossil-based fuels and exhibit improvedperformance. This thesis focuses on aspects of catalyst deactivation and kinetic modellingof HDO reactions. In the first study, the influence of iron (Fe) as a poison during HDO of a model compoundfor renewable feeds (Oleic acid) over molybdenum based sulfided catalysts wasinvestigated. Fe is a potential contaminant in renewable feeds due to corrosion duringtransportation and storage in iron vessels. A series of experiments with varying Fe-oleateconcentration in the feed over MoS2/Al2O3 and NiMoS/Al2O3 catalysts. There was a salientdrop in the activity of the catalysts. At higher Fe concentration, for the NiMoS catalyst, theselectivity for the direct hydrodeoxygenation product (C18 hydrocarbons) increased.However, it was opposite for the MoS2 catalyst. There was a decrease in the yield of directhydrodeoxygenation products and an increase in yield of decarbonated products. It wasproposed that Fe interacted with these two catalyst systems differently. Fe influenced thecritical step of creation of sulfur vacancies in a negative way which resulted in loweractivity. Microscopic analysis indicated that Fe was preferentially deposited close oraround the nickel promoted phase, which explained why the role of Ni as a promoter forthe decarbonation route was subdued for the NiMoS catalyst. In the second study, the kinetics during HDO of stearic acid (SA) over a sulfidedNiMo/Al2O3 catalyst were explored to investigate the reaction scheme. Model compoundslike octadecanal (C18=O) and octadecanol (C18-OH) were employed to understand thereaction steps and quantify the selectivity. A Langmuir–Hinshelwood-type kinetic modelwas used to investigate the kinetics. The results from the proposed kinetic model werefound to be in good agreement with experimental results. In addition, the model couldeffectively reproduce the observed experimental profiles of different intermediates likeC18=O and C18-OH and illustrate phenomena like inhibiting effects of the fatty acid.
Language: English
Subfield: Catalysis
Open Access status: green
OpenAlex ID: W2899651372
FWCI:
Cites: 37
Cited by:
Related to: 10