The Effect of Nanocrystalline Cellulose (NCC) Filler on Polylactic Acid (PLA) Nanocomposite Properties
Year: 2018
Type: article
Abstract: This paper discusses the effect of nanocrystalline cellulose (NCC) when used as filler on polylactic acid (PLA)-based nanocomposites and on its mechanical properties and permeability. NCC was produced from commercial cellulose and another cellulose source, i.e. oil palm empty fruit bunch, by hydrolysis of microcrystalline cellulose with sulphuric acid and by oxidation with ammonium persulfate. The nanocomposites were made by adding nanocrystalline cellulose with varying compositions into PLA. A solvent casting method was used to produce a nanocomposite film with 5% v/v triacetin as a coupling agent. Both methods produced crystalline celluloses within the micro and nano range with mean particle size at 99.5 nm and 157.9 nm for the sulphuric acid hydrolysis and the ammonium persulfate oxidation method, respectively. The utilization of NCC as PLA composite filler increased the percentage of elongation at break with a highest percentage 19.02% for addition of 1% NCC filler. However, higher compositions of cellulosic filler resulted in a decreasing trend of tensile strength and elongation at break. Higher content of NCC filler in the PLA matrix increased the nanocomposite's water vapor permeability.
Authors: Daniel I. Simangunsong, Try H. A. Hutapea, Hyung Woo Lee, Jung Oh Ahn, Johnner Sitompul
Language: English
Subfield: Biomaterials
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $150
OpenAlex ID: W2903124379
