Work

Three-dimensional micron-porous graphene foams for lightweight current collectors of lithium-sulfur batteries

Year: 2018

Type: article

Abstract: This paper reports a three-dimensional (3D) stochastic bicontinuous micron-porous graphene foam (3D-MPGF) developed as lightweight binder-free current collectors for sulfur cathodes of lithium-sulfur batteries. 3D-MPGF is synthesized by a facile process that originally combines the synthesis of porous metals by the reduction of metallic salts and chemical vapor deposition (CVD) growth of graphene in a continuous route. 3D-MPGF presents micron-porous structure with both interconnected tubular pores and nontubular pores of sizes from hundreds nanometers to several microns. By adjusting CVD time, the thickness of graphene wall is tunable from few atomic layers to ten layers. Raman results prove a high crystalline of 3D-MPGF. Attributed to the low density and high quality, 3D-MPGF can be used as promising lightweight binder-free current collectors. The 3D-MPGF loaded with S of 2.5 mg cm−2 exhibited an ultrahigh initial capacity of 844 mAh g−1 (of electrode), and maintain at 400 mAh g−1 after 50 cycles at 0.1C (167 mA g−1). With increasing the loading of S, the electrodes present higher areal capacities. When the loading of S is 13 mg cm−2, the areal capacity of 3D-MPGF/S reaches 5.9 mAh cm−2 after 50 cycles at 0.1C. The use of 3D micron-porous graphene foam proves considerably enhanced gravimetric capacity densities (of overall electrode), which can be a direction not only for batteries but also for other energy storage devices.

Source: Carbon

DOI: 10.1016/j.carbon.2018.12.103

Authors: Liqiang Lu, Jeff Th. M. De Hosson, Yutao Pei

Institutions: University of Groningen, Zernike Institute for Advanced Materials

Language: English

Topic: Advanced Battery Materials and Technologies

Subfield: Electrical and Electronic Engineering

Field: Engineering

Domain: Physical Sciences

SDG: Affordable and clean energy

Open Access status: hybrid

Estimated APC paid: $4,830