Work

Microbubble-enhanced DBD plasma reactor for the treatment of organic suspensions

Year: 2018
Type: dissertation
Abstract: Atmospheric pressure plasmas have been applied to a multitude of liquid-based applications such as\nwound healing, combustion, surface cleaning and small-scale chemical processing. For most of the\napplications, a plasma jet placed above the liquid is favoured, that is typically supplied with argon or\nhelium. For large-scale processes such as wastewater or biomass pretreatment, localised plasma jets\nbecome uneconomical and inefficient. In the work presented in this thesis, a novel microbubbleenhanced DBD plasma reactor is presented which allows efficient transfer of highly reactive species\nfrom the plasma to a liquid medium. This novel design allows the discharge to be formed in the\nimmediate vicinity of the gas-liquid interface enabling effective mass transfer of short-lived species.\nThe reactor was characterised in the first instance to evaluate and optimize its performance by varying\nall the input parameters. These studies include understanding the effect of the bubble size, input gas\ncomposition and input power supply. The reactive species generated in the gas phase were measured\nusing absorption spectroscopy, and the liquid phase concentrations of the reactive species were\nmeasured using a variety of chemical probes. By modelling the reactor, a more in-depth analysis was\ncarried out by tracking the short-lived species over a high time resolution. This led to improvements in\nefficiency by selecting the optimum operating conditions depending on the plasma chemistry required.\nAs one of the key reactive species is ozone, being able to quantify this concentration in the liquid phase\nwith both precision and accuracy is essential. This led to the development of a selective chemical probe\nand measurements made with this new probe were compared against existing measurement techniques.\nThe reactor was then applied to several applications including pretreatment of lignocellulosic biomass,\npretreatment of anaerobic digester feed and treatment of final wastewater effluent. Treatment of\nlignocellulosic biomass is often required to break apart the structure to ease the conversion of biomass\nfeedstock to a fuel, usually facilitated by enzymes or bacteria. By treating a suspension of biomass\nwithin the reactor, the reactive species transferred to the solution attack the structure increasing the\nyield of either biogas or ethanol depending on the process applied. Limitations of this approach to\npretreatment were identified and future improvements were suggested. When treating a solution\ncontaminated with E. coli, the oxidative species were found to be highly effective in inactivation of the\nbacteria. The presence of organic matter such as humic acid can significantly reduce the inactivation\nrate as they consumed the reactive species with competing reactions.
Language: English
Open Access status: green
OpenAlex ID: W2911541492
Cites: 241
Cited by: 1
Related to: 10