A Computational Comparison of Flow and Pressure Fields in Axial and Reverse Flow Cyclone Separators
Year: 2017
Type: article
Abstract: Cyclonesare separation devices that use centrifugal forces to remove dense phases fromtwo phase flows. There are many application areas of cyclone separators rangingfrom industrial processes to domestic applications due to their simplestructure and lack of movable components. For this reason, they are commonlypreferred where two phase fluid flow accommodated and separation is required.In this study, axial and reverse flow tangential inlet novel cyclone geometrieswere introduced to configure different separation space and to reduce pressuredrop in comparison with traditional cyclone geometry. Although the constructionof a cyclone is simple, the cyclone flow and separation process are verycomplex. Therefore, CFD is quite appropriate provided that the propermathematical models and computational techniques are used. 3-D and unsteadygoverning equations were used for the turbulent cyclone flow. Hexahedral mesheddomain was solved by using Fluent CFD software. Eulerian approach was used tosolve the flow field and transient Reynolds Stress Model (RSM) with thescalable wall function. Lagrangian approach with DPM (Discrete Phase Model) wasused to calculate discrete phase by releasing particles from inlet surface. CFDcalculations were run for different geometric configurations in order toanalyze performance of cyclones in terms of pressure drop, cut-off diameter andgrade efficiency. Axial and tangential velocity profiles are presented atdefined sections. The computational results of pressure drop, velocity fieldand separation efficiency were also compared for the axial and reverse flowcyclones at the same flow rates.
Author: Ali Sakin
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W2916681882
