Work

Development of Near-IR and Beam Shaping of Mid-IR Lasers

Year: 2019
Type: dissertation
Abstract: This study seeks to produce short-pulsed laser output with high peak and average powers to meet the demand for industrial ranging applications.Q-switched lasers are suitable for this due to their ability to produce high energy, high average power, high peak power, short pulses and high efficiency at high pulse repetition rates.This research seeks to develop an actively Q-switched 100 kHz source that emits peak powers of ~10 kW with pulse widths in the 1 ns range.To obtain these parameters, a diode end-pumped laser was constructed and two Q-switching devices were investigated, namely Acousto-Optic Modulators (AOMs) and Electro-Optic Modulators (EOMs).An AOM uses an RF-generated acoustic grating to diffract light out of the cavity, inducing a variable loss, which Q-switches it.The advantages are that AOMs do not require high voltages, are usually polarisation insensitive and are well understood.However, the switching speed is limited by the speed of sound in the material and their restricted modulation depth often causes hold-off problems.EOMs require high voltages for their operation.However, when EOMs are not shielded, the high voltages cause electromagnetic interference (EMI) noise, as well as ringing, which result in undesired losses during Q-switching.Electro-optic Q-switching with solid state lasers mostly uses the Pockels effect to rotate beam polarisation and this, together with polarising elements, causes a varying loss within the cavity.This makes it possible to switch the cavity losses quickly since the switching time depends mainly on the high-voltage source-switching speed.EOM Q-switched are also compact, they have high extinction ratios and do eliminate the hold-off problems typically seen in AOMs.A Nd:YVO 4 pulsed laser was developed using an AOM as a Q-switch element and its outputs measured.This laser produced pulses of 2 ns widths and peak powers of over 10 kW at the pulse repetition frequency of 140 kHz.The observations on the AOM Q-switch results show that pulse widths of 1 ns could not be reached.Double pulsing, which occurred due to slow switching speeds, was also observed at high peak powers.
Language: English
Open Access status: green
OpenAlex ID: W2946054851
Cites: 151
Cited by:
Related to: 10