Solder layer degradation measurement for sic-MOSFET modules under accelerated power cycling conditions
Year: 2018
Type: conference-paper
Abstract: Die-attach solder layer and bond wires are the two weakest parts in power modules. In order to distinguish the solder layer and bond wire degradation during accelerated tests, a simultaneous on-line measurement method is proposed in this paper. By means of auxiliary source terminal, both the solder layer resistance increase and bond wire resistance increase can be measured and monitored separately. To measure accurately the solder layer degradation, the intrinsic diode is used as heating source in place of the MOSFET switch. In this way, the measurement method becomes intrinsically insensitive to possible threshold voltage shifts, typical of accelerated tests of SiC power MOSFETs. Finally, the experimental results are presented to verify the feasibility of the proposed test method. It is revealed that the solder layer resistance increases linearly with the number of cycles in good approximation.
Authors: Haoze Luo, Francesco Iannuzzo, Frede Blaabjerg
Institutions: Institute for Energy Technology, Aalborg University
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2955143890