Year: 2019
Type: dissertation
Abstract: The commercial development of highly-efficient and low-cost bifunctional electrocatalysts for overall water electrolysis devices requires a simple synthesis method for controllable electrocatalyst preparation. However, common synthesis methods suffer from tedious process requirements and uncontrolled synthesis. Consequently, the development of efficient bifunctional electrocatalysts using simple and controlled techniques is particularly desirable for this field. To this end, the objectives of this thesis are to develop a simple strategy for the controllable synthesis of highly-efficient and low-cost bifunctional electrocatalysts and to investigate their electrocatalytic mechanisms. The first aspect of this thesis focuses on charge state manipulation in cobalt selenide catalysts for overall water electrolysis coupled with a synchrotron-based study of the electrocatalytic mechanism. Three-dimensional cobalt selenide electrodes with CoSe and Co9Se8 phases are synthesized by a one-step calcination of Co foil with Se powder in a vacuum-sealed ampoule. The charge state of Co species and the electrocatalytic performance of the prepared catalysts are manipulated by controlling the Co to Se mass ratio. The mechanism study shows that for the as-prepared cobalt selenide electrocatalysts, a high Co charge state favors oxygen evolution reaction (OER) activity while a low Co charge state promotes hydrogen evolution reaction (HER) activity. The resultant materials can act as free-standing bifunctional electrocatalytic electrodes for the OER and HER in alkaline media. Moreover, a 10.3 mA cm-2 current density at 1.8 V is achieved for overall seawater electrolysis by exploiting the as-synthesized cobalt selenide electrodes as both anode and cathode. This performance is three times higher than that for a noble-metal-based seawater electrolyzer benchmark at the same voltage (2.9 mA cm-2). The second part of this thesis is to develop interfacial nickel nitride/sulfide as a bifunctional electrode to promote dissociative adsorption of water molecules for highly efficient overall water electrolysis. A nickel nitride/sulfide electrode (NiNS), whereby Ni3N and Ni3S2 species are interfaced, is synthesized via a one-step calcination process of Ni foam with thiourea in a vacuum-sealed ampoule. The resultant NiNS can be employed directly as a bifunctional electrocatalyst for water splitting with excellent activity toward the HER and OER. The significant electrocatalytic performance of NiNS is attributed to the interface between Ni3N and Ni3S2, which functions as the electrochemical active sites and is beneficial for dissociative adsorption of water molecules. Current densities of 12.4 mA cm−2 and 48.3 mA cm-2 at 1.8 V are achieved for overall water electrolysis under neutral pH conditions and in seawater, respectively, when NiNS is applied as both the anode and cathode. This performance is significantly better than that of the benchmark Ir-C and Pt-C electrode system. The third section of this thesis is to establish non-metal single iodine atom electrocatalysts for the HER. The single atom nickel iodide (SANi-I) electrocatalyst with atomically dispersed non-metal iodine atoms is prepared via a simple calcination step in a vacuum-sealed ampoule and subsequent cyclic voltammetry activation. Various advanced characterizations, including aberration-corrected high-angle annular dark-field scanning transmission electron microscopy and synchrotron-based X-ray absorption spectroscopy are applied to confirm the atomic-level dispersion of iodine atoms and detailed structure of SANi-I. Single iodine atoms are found to be isolated by oxygen atoms. The SANi-I exhibits robust structural stability and exceptional electrocatalytic activity for the HER. In-situ Raman spectroscopy reveals that the hydrogen adatom (Hads) is adsorbed by a single iodine atom, forming the I-Hads intermediate, which promotes the HER process. The fourth part of this thesis focuses on contemporaneous oxidation state manipulation of cobalt nitride and sulfide (CoNS) bifunctional electrocatalysts to accelerate intermediates desorption for both OER and HER. The contemporaneous manipulation of Co, N, and S oxidation states was realized via the simple synthesis of CoNS, in which cobalt foil was activated by hydrochloric acid to prepare activated cobalt (ACo) and afterwards ACo was sealed with thiourea in an evacuated ampoule to synthesize CoNS. The oxidation state analyses via X-ray photoelectron spectroscopy reveal that low Co oxidation state favors the OER while high N and S oxidation state promotes the HER. This indicates that the water splitting process for this electrocatalyst is kinetically governed by intermediates desorption. A 100 mA cm−2 OER current density is achieved for CoNS at an overpotential of 275 mV, which is lower than that for the Ir/C benchmark (374 mV) in 1.0 M KOH. A 4.5 mA cm-2 current density at a voltage of 1.8 V is achieved for CoNS when employed for overall electrolysis in neutral buffer solution, which is higher than that for the noble-metal based system at the same voltage (3.4 mA cm-2).
Author: Yongqiang Zhao
Institution: The University of Adelaide
Language: English
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W2972813329
