Work

Tracking of the phase change front of a PCM in a rectangular enclosure

Year: 2019
Type: conference-paper
Abstract: An experimental setup is designed to track the melting front of a phase change material, PCM, RT35HC, in a rectangular enclosure.One wall is heated through a constant heat flux, and another wall is kept at a uniform cold temperature, using a cold plate.All other walls are insulated in order to create a two-dimensional melt front.Photographs of the enclosure are taken every 20 seconds with a Basler Ace camera.Transient melting experiments have been performed.The effect of varying heat fluxes (800, 1000, 1200W/m²) has been investigated.Four different melting regimes are witnessed.Temperatures, measured by thermocouples inside the PCM are used to generate temperature contourplots, and an energy balance.A heat transfer coefficient over the melt is defined and compared to values found in literature.The four different melting regimes are still the same for the three different heat fluxes, but are initiated more quickly for a higher heat flux.By differentiating the liquid fraction in time, these melting regimes are defined.The energy balance over the enclosure is showing that the total added heat to the PCM is a function of liquid fraction.A heat transfer coefficient, based on this added energy to the enclosure follows the same trend as the differential liquid fraction.At the onset of natural convection in the enclosure, liquid fraction and thus also heat transfer rises fastest.Future CFD melting simulations can be done to compare these simulations to the experimental results.
Language: English
Open Access status: green
OpenAlex ID: W2973732972
FWCI: 1.847
Cites: 16
Cited by: 3
Related to: 10