Work

Parametric Optimisation of an ORC in a Wood Chipboard Production Facility to Recover Waste Heat Produced from the Drying and Steam Production Process

Year: 2019

Type: article

Abstract: The wastes in wood industries (waste chips) are commonly used as fuel for burners to produce steam and to use the remaining heat in the drying process. However, in spite of that, there is a considerable amount of heat evaluated from the burn of waste chips still released to the atmosphere without use. Therefore, in the present study, a cogeneration cycle design by used of ORC was designed and parametrically optimised for six organic working fluids (acetone, ethanol, R11, RE245fa2, R365mfc and R601a). During the ORC optimisation, the ORC turbine inlet temperature was changed from the saturated steam temperature of the fluid to the maximum temperature of the fluid. The ORC turbine inlet pressure was increased from 7.5 bar to the critical pressure of the fluid. As a result of the study, the maximum net power, net thermal efficiency and exergy efficiency of the ORC were found as 453.91 kW, 30.01% and 67.56% at 340 °C and 62.5 bar from the ORC with ethanol. This means that almost 30% of the waste heat could be recovered by use of the ORC with ethanol. By using the designed cogeneration system, it was calculated that the thermal efficiency of the system can be increased up to 74.01%.

Source: Energies

DOI: 10.3390/en12193656

Author: Yıldız Koç

Institution: İskenderun Technical University

Language: English

Topic: Thermodynamic and Exergetic Analyses of Power and Cooling Systems

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

SDGs: Responsible consumption and production, Affordable and clean energy

Open Access status: gold

Estimated APC paid: $1,824