Year: 2019
Type: article
Abstract: Due to its enhancing properties in high-tech material applications, the rare earth element Scandium (Sc) is continuously gaining interest from researchers and material developers. The aim of this research is to establish an energy and resource efficient process scheme for an in situ extraction of Al-Sc master alloys, which offers usable products for the metallurgical industry. An AlSc20 alloy is targeted with an oxyfluoridic slag as a usable by-product. The thermochemical baseline is presented by modelling using the software tool FactSage; the experimental metal extraction is conducted in a vacuum induction furnace with various parameters, whereas kinetic aspects are investigated by thermogravimetric analysis. The Sc-containing products are analyzed by ICP-OES/IC concerning their chemical composition. Optimum parameters are derived from a statistical evaluation of the Sc content in the obtained slag phase. The material obtained was high in Ta due to the crucible material and remarkably low in Al and F; a comparison between the modelled and the obtained phases indicates kinetic effects inhibiting the accomplishment of equilibrium conditions. The formation of a Sc-rich Al-Sc phase (32.5 wt.-% Sc) is detected by SEM-EDS analysis of the metal phase. An in situ extraction of Al from Ca with subsequent metallothermic reduction of ScF 3 as a process controlling mechanism is presumed.
Source: Metals
DOI: 10.3390/met9111223
Institution: RWTH Aachen University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,520
OpenAlex ID: W2987911647