Work

Dynamic Wireless Charging of Electric Vehicles

Year: 2018
Type: article
Abstract: This thesis deals with the Wireless Power Transfer (WPT) for the dynamic charging of Electric Vehicles (EVs). Dynamic WPT is an emerging technology that can accelerate the transition from conventional to electrical mobility. Dynamic Wireless Power Transfer Systems (WPTSs) exploit the principle of electromagnetic induction to power EVs during their motion without the need for a galvanic contact between the vehicles and a stationary supplying system. Since a portion of the power required by the EVs for the charging and for the propulsion is provided by an external grid, the size of the on-board batteries can be shrunk with the consequent benefits in terms of cost and weight of the EVs. An infrastructure of widespread public dynamic WPTSs can contribute to maintain the EVs always charged thus providing them with an ideal infinite range. After a detailed introduction of the fundamental principles that govern the WPT technology and after a thorough description of a general WPTS, the focus of the thesis moves to dynamic WPTSs. The variations of the magnetic parameters caused by the EV movement make the study, the design, and the control of dynamic WPTSs very challenging. In the thesis, various dynamic WPTSs are studied under steady-state condition. This analysis shows that the LC compensation in the track side is particularly suited for such systems since it provides the track with the current source capability. This feature greatly simplifies the control and the power transfer regulation of dynamic WPTSs. The attention of this thesis is focused mainly on the modeling and on the control of dynamic WPTSs. As regards the modeling, a novel method called Modulated Variable Laplace Transform (MVLT) is proposed. The method is used for the base band modeling of systems, such as dynamic WPTSs, where modulated quantities are involved. The accuracy of the MVLT is verified through the application of the method for the study of the dynamic of various circuits. In particular, MVLT method is adopted to find the dynamic model of an LC-compensated dynamic WPTS. With the aid of the obtained model the regulator that controls the track current of the system is designed. The performance of the regulator is tested by simulations, obtaining results in good agreement with the expected ones. The thesis investigates also the dc/dc converter installed on-board the EVs responsible for the battery charging control. The operation of this converter is analyzed in conjunction with the type of compensating network used for the pickup. A novel topology for the pickup circuitry is proposed together with a new control strategy for the switch of the dc/dc converter. This topology allows for the pickup size reduction and it shows high performance in terms of efficiency.
Language: English
Open Access status: green
OpenAlex ID: W2998086120
FWCI: 0.089
Cites: 89
Cited by: 4
Related to: 10