Work

Integración De Un Sistema Inalámbrico De Muestreo Con Esp8266 Y Raspberry Pi (wireless Sensor System Integration Based on the Internet of Things)

Year: 2019
Type: article
Abstract: ResumenEn el presente artículo, se muestra el desarrollo y los resultados obtenidos de un sistema inalámbrico para el muestreo de temperatura y humedad dentro del Laboratorio Nacional de Vivienda y Comunidades Sustentables ubicado en las instalaciones de la Universidad Autónoma de Ciudad Juárez. El sistema se compone de sensores DHT22, tablillas NodeMCU-ESP8266 y un Raspberry Pi 3 que funge como servidor. Además, por medio de una interfaz se ofrece un acceso al sistema que se encuentra conectado a una red de Internet, lo que permite el monitoreo en tiempo real y el análisis histórico de las variables medidas. El propósito del muestreo es medir las propiedades de aislamiento térmico de nuevos materiales propuestos para la construcción de viviendas. Para observar el desempeño del sistema construido se realizaron pruebas de precisión de las mediciones y de tiempos de acceso. Los resultados obtenidos demuestran que el sistema es robusto y ofrece mediciones en tiempo real con un error de 1 grado centígrado y con un tiempo máximo de acceso de 3.6 segundos.Palabras Claves: Internet de las Cosas, Sensor de temperatura y humedad Raspberry Pi, Linux, Placa NodeMCU-ESP8266. (In this paper, is presented the development and the results obtained of a wireless system for sensing temperature and humidity inside the National Laboratory of Housing and Sustainable Communities located in the facilities of the Autonomous University of Ciudad Juárez. The system is integrated using DHT22 sensors, a NodeMCU-ESP8266 development board and a Raspberry Pi 3 that acts as a server. Additionally, the system is accessible through an interface to the Internet network, which allows real-time monitoring and the historical analysis of measures variables. The main purpose of the sensing task is to measure the isolation properties of new proposed materials for housing development. To validate the performance of the built system, testing was performed on the data measured as well as access timing. The results obtained show the robust performance of the proposed system and how can it offer real-time data with a mean error of 1 Celsius degree, and with a maximum access time of 3.6 seconds.Keywords: Internet of Things, Temperature and humidity sensor, Raspberry Pi, Linux, NodeMCU-ESP8266 board.)
Language: Spanish
Open Access status: hybrid
OpenAlex ID: W2998664964
FWCI:
Cites: 18
Cited by:
Related to: 10