Pyrolysis-gas chromatography/mass spectrometry study of chromophores in dissolving wood pulp.
Year: 2018
Type: dissertation
Abstract: Dissolving wood pulp (DWP) is bleached wood pulp that contains high cellulose content, typically \n>95%. The bleaching is done to remove remnants of lignin and hemicelluloses that are not \nnecessary for the final DWP. The pulp is chemically processed to make high-grade products such \nas speciality papers, viscose fabrics, and microcrystalline cellulose used in applications such as \ntextile fibres, fillers in pharmaceutical tablets, or as a thickener in food additives, and manufacture \nof paints. Frequently, the fully bleached DWP exhibits an unwanted yellowish haze. This \nphenomenon results in loss of brightness in the pulps and is referred to as brightness reversion. \nRemnants of polysaccharides on DWP are believed to give rise to chromophores responsible for \nthe brightness reversion. Such reversion in brightness is viewed as an early sign of ageing or \ndeterioration of the pulp. \nThe impact of chromophores on the quality of DWP is a pressing issue in the global pulp and \npaper industry. Thus, identification of chromophores in the pulps is an important aspect to solving \nthis problem and efforts have been made to develop techniques for identification of the \nchromophores responsible for brightness reversion. For example, an elegant method, termed \nchromophore release and identification, has been developed. However, application of the \nmethodology for analysis of chromophores in pulps is tedious and long. It takes, on average, seven \ndays to generate results, and a large quantity of pulp is required for the analysis. Such a long \nprocessing time is not ideal for industrial applications where time is of the essence. Hence, in this \nstudy, a novel methodology that allows for rapid and accurate characterization of chromophores \ndirectly from pulp fibres has been developed. The method entails direct analysis of chromophores \non pulps without pre-extraction of chromophores, and results are obtained in less than an hour. \nThe methodology entails the use of analytical pyrolysis combined with gas chromatography/mass \nspectrometry (Py-GC/MS) for direct detection and identification of chromophores in DWP. \nTo develop the method, selected fully bleached DWP samples were induced for brightness \nreversion and then analysed by Py-GC/MS and any chromophores present were identified by mass \nspectrometry. Probable compounds that could have contributed to the brightness reversion were \nalso induced for brightness reversion and analysed to ascertain any similarities with the pyrograms \nof the brightness reversed DWP samples as well as mass spectral identities of the compounds. The \nresults showed that the pulps that were induced for brightness reversion contained relatively higher \namounts of chromophores than the original pulps, with ketones and furan-type compounds \n(originating from degraded cellulose and remnants of the hemicelluloses) being the major \nchromophoric groups. \nAnalysis of data on pulps with varying brightness reversion values did not show correlation with \nthe relative amounts of chromophores detected by Py-GC/MS. The results confirmed literature \nreports that brightness is not a good indicator of the concentration of chromophores in pulps. \nThe developed Py-GC/MS method was then used to identify chromophores in DWP samples \nproduced from the industry and the laboratory. Considering that the industry-produced DWP was \nfrom a wood furnish comprised of a mixture of wood species, it was essential to understand how \nthe different clones/species in the wood furnish influenced the formation of chromophores. the \nresults showed that different wood species contained the same type of chromophores, with furantype compounds and conjugated ketones being the major groups of compounds detected. Pulps \nwere sampled from different unit operations in a mill to ascertain the profiles of chromophores \nalong the mill process. Additionally to the industrial in-process pulps, a number of single clone \nacid bi-sulphite pulps were bleached in the laboratory to produce pulps (in-process) that were also \nanalysed for chromophore content using Py-GC/MS. The main groups of chromophores identified \nin all the samples were still furans-type compounds and conjugated ketones. Wet chemical \nanalysis of in-process pulps showed that the remnants of hemicelluloses and degraded cellulose \nin the pulps have a significant impact on the formation of the ketones and furan-type compounds. \nFinally, the developed Py-GC/MS method was tested on other pulps (besides DWP) that contained \nhigher amounts of lignin (viz., the newsprint and kraft pulp). This was done to ascertain if the \nmethod would apply to other pulps besides DWP. As expected, the results showed that newsprint \ncontained very high amounts of chromophores due to lignin whereas kraft pulps exhibited smaller \namounts of lignin-type pyrolysis products. Thus, lignin was the major cause of brightness \nreversion in pulps that contain lignin and residual amounts of lignin. \nOverall, the major chromophoric compounds identified in DWP were conjugated ketones and \nfuran-type compounds. These compounds originated from remnants of hemicelluloses and \ndegraded cellulose in the pulps: this agrees with literature reports on the origin of chromophores \nin cellulosic materials. The Py-GC/MS is a novel tool for rapid and direct analysis of residual \nchromophores in fully bleached and in-process DWPs and can be utilised for rapidly identifying \nthe presence and chemistry of residual chromophores in DWP. The technique is currently being \nused to monitor the quality of industrially-produced DWP from different pulp mills.
Author: Vezekile Princess. Dladla
Language: English
Topic: Lignin and Wood Chemistry
Subfield: Process Chemistry and Technology
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W3017343576
