Work

Fault Diagnostics of Planetary Gears under Variable-speed Conditions Using Time-frequency Analysis

Year: 2019
Type: dissertation
Abstract: Unexpected failures of a planetary gear may result in substantial economic losses and safety problems. Therefore, extensive prior studies have been performed to develop diagnostic methods for planetary gears. However, most of the studies assumed that the planetary gears operate under constant speed condition although many planetary gears in practical application rotate under variable speeds. Therefore, in this dissertation, fault diagnosis methods are developed for planetary gears under variable-speed conditions. In developing the methods, time-frequency analysis is used to reveal time-varying spectral behaviors of planetary gear vibration signals. However, there are several challenges in developing the fault diagnosis methods for planetary gears under variable speeds: 1) fault sensitivity, 2) computation time, and 3) complex speed profile. To cope with these challenges, this dissertation is composed of three research thrusts. The first thrust proposes a fault diagnosis method with enhanced sensitivity. The method could improve fault sensitivity of the diagnostic method by minimizing effects from variable-speed conditions using the time-frequency analysis. Further, the faulty signals in the time-frequency analysis are enhanced in the developed method. Next, the second research thrust presents a time-efficient fault diagnosis method. In the method, time-efficient time-frequency analysis is used to reduce computation time. However, the fault sensitivity is inherently reduced by using the time-efficient time-frequency analysis. Therefore, in the proposed method, the reduced fault sensitivity from the time-efficient time-frequency analysis is compensated by utilizing characteristics of signal and system. Finally, the third research thrust develops an image-based fault feature, which could extract fault-related characteristics independent of speed profiles. In the method, only faulty components are exploited from the time-frequency image data. The feature is independent of other components using the image analysis technique. Therefore, the proposed method could be applied to planetary gears under complex speed profiles. Validity of the proposed methods is demonstrated using planetary gears of simulation and experiment signals. Each developed method could be used for planetary gears under variable-speed conditions for their use, i.e., fault sensitivity, time-efficiency, and complex speed profiles.
Author: 박정호
Language: English
Open Access status: green
OpenAlex ID: W3033599305
Cites: 145
Cited by:
Related to: 10