Batch and continuous fixed bed adsorption of heavy metals removal using activated charcoal from neem (Azadirachta indica) leaf powder
Year: 2020
Type: article
Abstract: The present investigate was intended for adsorption of heavy metals i.e. Pb, Cu, Cr, Zn, Ni and Cd onto activated charcoal prepared from neem leaf powder (AC-NLP) using batch and column studies. Batch adsorption was performed using different variables like adsorbent dose, temperature and contact duration. Thermodynamic analysis of batch treatment concluded that adsorption is thermodynamically feasible and endothermic. This adsorption followed the Pseudo second-order kinetic model derived from correlation coefficient values of chemical kinetic studies. For column study, interpretation of breakthrough curves and parameters were conducted by varying flow rate, initial concentration and bed height; and reveal that optimum conditions were lower flow rate (5 mL/min) and lower initial concentration (5 mg/L) and higher bed height (20 cm). Comparisons of batch and column study through isotherm models were evaluated and column study is more preferred than batch treatment. Maximum Thomas adsorption capacity was achieved upto 205.6, 185.8, 154.5, 133.3, 120.6, 110.9 mg/g for Pb, Cu, Cd, Zn, Ni and Cr respectively. This removal pattern is elucidated by metal ionic properties. Various adsorbing agents such as acids and bases were utilized for adsorption-desorption of AC-NLP.
Source: Scientific Reports
Author: Himanshu Patel
Language: English
Subfield: Water Science and Technology
Field: Environmental Science
Domain: Physical Sciences
Keywords: heavy metal removal, adsorption, activated carbon, neem leaf powder, Azadirachta indica, lead, copper, chromium, zinc, nickel, cadmium, fixed-bed column, breakthrough curves, Thomas model, adsorption isotherms, adsorption kinetics, adsorption thermodynamics, adsorbent regeneration, adsorption-desorption
Open Access status: gold
Estimated APC paid: $1,870
OpenAlex ID: W3091975320
