Work

Time-Enhanced Performance of Oxide Thermoelectric Modules Based on a Hybrid p–n Junction

Year: 2020

Type: article

Abstract: The present challenge with all-oxide thermoelectric modules is their poor durability at high temperatures caused by the instability of the metal-oxide interfaces at the hot side. This work explains a new module concept based on a hybrid p–n junction, fabricated in one step by spark plasma co-sintering of Ca3Co4–xO9+δ (CCO, p-type) and CaMnO3−δ/CaMn2O4 (CMO, n-type). Different module (unicouple) designs were studied to obtain a thorough understanding of the role of the in situ formed hybrid p–n junction of Ca3CoMnO6 (CCMO, p-type) and Co-oxide rich phases (p-type) at the p–n junction (>700 °C) in the module performance. A time-enhanced performance of the modules attributed to this p–n junction formation was observed due to the unique electrical properties of the hybrid p–n junction being sufficiently conductive at high temperatures (>700 °C) and nonconductive at moderate and low temperatures. The alteration of module design resulted in a variation of the power density from 12.4 (3.1) to 28.9 mW/cm2 (7.2 mW) at ΔT ∼ 650 °C after 2 days of isothermal hold (900 °C hot side). This new concept provides a facile method for the fabrication of easily processable, cheap, and high-performance high-temperature modules.

Source: ACS Omega

DOI: 10.1021/acsomega.0c04134