Work

High Temperature Oxidation and Electrochemical Studies on Novel Co-Base Superalloys

Year: 2013
Type: dissertation
Abstract: Isothermal oxidation in air was carried out on novel γ'-strengthened Cobalt-base superalloys of the system Co-Al-W-B.After fast initial oxide formation, a multi-layered structure establishes, consisting of an outer cobalt oxide layer, a middle spinel-containing layer, and an inner Al 2 O 3 -rich region.Ion diffusion in outward direction is hindered by the development of Al 2 O 3 , that can be either present as a continuous and protective layer or as a discontinuous Al 2 O 3 -rich area without comparable protective effect.Furthermore, high temperature oxidation leads to phase transformation (from γ/γ' into γ/Co 3 W) at the alloy/oxide layer interface due to aluminium depletion.Pure cobalt and ternary Co-Al-W alloys exhibit parabolic oxide growth due to the lack or insufficient amounts of protective oxides, whereas quaternary Co-Al-W-B alloys possess sub-parabolic oxidation behaviour (at 900 °C).At lower temperatures (800 °C), even a blockage of further oxidation can be observed.High amounts of B (0.12 at%) significantly improve oxidation resistance mainly due to its beneficial effect on inner Al 2 O 3 -formation at the alloy/oxide interface.Furthermore, B prevents decohesion of high temperature scales due to the formation of B-rich phases (presumably tungsten borides) in the middle oxide layer.Appropriate amounts of chromium (8 at%) as additional alloying element to Co-Al-W-B alloys lead to the formation of an inner duplex layer composed of protective Cr 2 O 3 and Al 2 O 3 phases.In this respect, chromium also benefits selective oxidation of aluminium, which results in higher Al 2 O 3 -contents compared to chromiumfree alloys.Major drawbacks of chromium additions are, on the one hand, the formation of volatile chromium-containing species at temperatures exceeding 1000 °C and on the other hand, the instability of the γ/γ'-microstructure.Titanium and silicon additions lead to improved oxidation resistance due to their beneficial effect on Al 2 O 3 formation (especially at 900 °C and higher) and due to additional generation of titanium-and silicon-rich phases, respectively, without altering the γ/γ'-microstructure.Moreover, the titanium-containing alloy is reported to exhibit excellent creep properties at 850 °C and hence this material is expected to be the most promising alloy system for further optimisation.In contrast, additions of silicon lead to silicon-containing phases at the oxide/alloy interface, within precipitates, and at the grain boundaries, which are expected Abstract to impair the mechanical properties.Additions of nickel most probably enhance solubility of boron within the alloy matrix and therefore the previously described positive boroneffect gets eliminated.Based on knowledge of other alloy systems, small amounts of the rare earth element yttrium are reported to improve the oxidation resistance.However, 0.005 atomic percent of yttrium in Co-Al-W-B alloys do not lead to the expected effect, presumably due to insufficient amounts of the minor element.Electrochemical measurements on the unoxidised Co-Al-W-B superalloy and pure cobalt in aqueous solutions of different pH reveal significantly improved corrosion resistance with increasing pH value due to the formation of a duplex layer, i.e.Co 3 O 4 or CoOOH species on top of a Co(OH) 2 film.Upon polarisation, both materials show primary and secondary passivation in alkaline 0.1 M NaOH solution, whereas limited passivation can be observed in neutral 1 M Na 2 SO 4 , and active dissolution in acidic 0.5 M H 2 SO 4 solution.Further investigations in neutral 0.5 M NaCl solution reveal limited initial passivation followed by severe pitting corrosion at higher potentials.High temperature oxide scales on the alloy surface are highly efficient barriers against corrosive attack over the entire polarisation range from -1 V to +2 V (vs.Ag/AgCl), indicating remarkable retardation of cathodic and anodic reactions.The best protective properties of high temperature oxides can be achieved in acidic solution.Even for thin oxide layers formed during short-term oxidation of only 1 hour at 900 °C, no breakdown events can be observed in chloride containing solution.The addition of silicon to the Co-Al-W-B alloy considerably increases corrosion resistance of the oxidised specimen in 0.5 M NaCl aqueous solutions due to the formation of protective Al 2 O 3 and silicon-rich species.This demonstrates that not only the thickness of high temperature scales, obtained by longer oxidation times and temperatures, but also their detailed nature, such as chemical composition or oxide stabilities in solutions of different pH, dictates the corrosion performance. ZusammenfassungIn der vorliegenden Arbeit wurden neuartige γ'-gehärtete Kobalt-Basis Superlegierungen des Systems Co-Al-W-B in Luftatmosphäre isotherm oxidiert.Die Anfangsphase ist geprägt durch schnelle Oxidation der Legierungsbestandteile, die im weiteren Verlauf ein Mehrschichtsystem ausbilden, bestehend aus einer äußeren Kobaltoxidschicht, einem mittleren spinellhaltigen Bereich und einer inneren Al 2 O 3 -reichen Zone.Das Al 2 O 3 kann entweder als durchgängige innere Schicht vorliegen, die weitere Oxidation verhindert, oder diskontinuierlicher Natur sein und somit keinen vergleichbaren Schutz gegen Ionendiffusion in auswärtige Richtung bieten.Des Weiteren führt die Hochtemperaturoxidation aufgrund der Aluminiumverarmung zu einer Phasentransformation an der Grenzfläche zwischen Oxid und Legierung.Hierbei wandelt sich das γ/γ' Gefüge zu einem zweiphasigen γ/Co 3 W Gebiet um.Reines Kobalt und ternäre Co-Al-W Legierungen zeigen parabolisches Oxidschichtwachstum, wohingegen bei quaternären Co-Al-W-B Legierungen bei 900 °C subparabolisches Verhalten zu beobachten ist und nach ca. 100 Stunden bei 800 °C keine weitere Oxidation stattfindet.Ein hoher Borgehalt (0.12 Atomprozent) wirkt sich hierbei, hauptsächlich aufgrund begünstigter innerer Al 2 O 3 -Bildung, positiv auf das Oxidationsverhalten aus.Des Weiteren führt das Vorhandensein borhaltiger Phasen (vermutlich Wolframboride) in der mittleren Oxidschicht zu einer beträchtlichen Verbesserung der Schichthaftung.Durch das Zulegieren von Chrom (8 Atomprozent) kann die Bildung einer inneren Doppelschicht erreicht werden, bestehend aus schützendem Cr 2 O 3 and Al 2 O 3 .Hierbei wirkt sich Chrom vorteilhaft auf die selektive Oxidation von Aluminium aus, was im Vergleich zu den chromfreien Legierungen höhere Gehalte an innerem Al 2 O 3 zur Folge hat.Als Hauptnachteile der Chromzugabe können zum einen die Bildung flüchtiger chromhaltiger Oxide bei Temperaturen oberhalb von 1000 °C, zum anderen eine resultierende Instabilität des γ/γ' Gefüges angesehen werden.Durch das Zulegieren von Titan und Silizium wird das Oxidationsverhalten ebenfalls aufgrund begünstigter innerer Al 2 O 3 -Bildung (insbesondere bei Temperaturen oberhalb von 900 °C) und der Ausscheidung titan-und siliziumreicher Phasen verbessert, jedoch bleibt das γ/γ' Gefüge stabil.Zudem wurden für titanhaltige Legierungen bereits4 Zusammenfassung ausgezeichnete Kriecheigenschaften bei 850 °C festgestellt, weshalb diese Materialien durch weitere Optimierungen vielversprechende Ergebnisse erwarten lassen.Im Gegensatz dazu werden für siliziumhaltige Legierungen verschlechterte mechanische Eigenschaften berichtet.Des Weiteren wird angenommen, dass die Zugabe von Ni zu Co-Al-W-B Legierungen zu einer erhöhten Löslichkeit des Bors im Korninneren führt und somit der beschriebene Bor-Effekt wieder aufgehoben wird.Geringe Mengen (0.005 Atomprozent) an Metallen der seltenen Erden, wie zum Beispiel Yttrium, verbessern die Oxidationsbeständigkeit der untersuchten Legierungen nicht, was aber vermutlich auf den zu geringen Gehalt an Yttrium zurückzuführen ist.Elektrochemische Messungen an unoxidierten quaternären Co-Al-W-B Legierungen und reinem Kobalt lassen eine verbesserte Korrosionsbeständigkeit mit zunehmendem pH-Wert der wässrigen Lösung erkennen.Dies ist durch die Bildung einer Doppelschicht zu erklären, bestehend aus einer Co(OH) 2 Passivschicht, die im weiteren Verlauf der Polarisation durch Abscheidung von Co 3 O 4 bzw.CoOOH erweitert wird.Sowohl die Legierung als auch reines Kobalt zeigen in alkalischen Lösungen diese primäre und sekundäre Passivierung, wohingegen in neutralem Medium lediglich ein limitierter Passivbereich und in sauren Lösungen aktive Materialauflösung beobachtet werden kann.Weitere Untersuchungen in neutraler chloridhaltiger Lösung zeigen eine anfängliche Passivierung der Materialien, gefolgt von großflächiger Lochkorrosion bei Überschreitung eines kritischen Potenzials.Oxidierte Legierungen besitzen aufgrund der schützenden Oxidschicht vor allem in sauren Lösungen eine ausgezeichnete Korrosionsbeständigkeit, wobei die Barriereschichten kathodische und anodische Oberflächenreaktionen in einem weiten Polarisationsbereich (-1 V bis +2 V vs. Ag/AgCl) außerordentlich stark hemmen.Selbst dünne Oxidschichten (nach nur einstündiger Oxidation bei 900 °C) zeigen kein Versagen in chloridhaltigen Lösungen.Durch Zugabe von Silizium ist es möglich die Korrosionsbeständigkeit der oxidierten Legierungen in Natriumchloridlösung sogar weiter zu steigern.Dies zeigt, dass nicht nur die Dicke, sondern auch die chemische Zusammensetzung der Schicht und die entsprechenden Oxidstabilitäten in Lösungen unterschiedlichen pH-Wertes und Chloridgehaltes die Korrosionseigenschaften diktieren.a higher melting point than Ni (1495 °C vs. 1455 °C) which may further increase the process temperature of the turbines.However, the high temperature oxidation behaviour of recently developed Co-base superalloys is still relatively poor and therefore has to be improved considerably by suitable alloying strategies, since lifetime of high temperature materials is significantly decreased by oxidation, as it impairs the mechanical properties. is usually an aqueous medium.In contrast to Ni-base superalloys [29-33], conventional Co alloys [34-39], and pure Co
Language: English
Open Access status: green
OpenAlex ID: W3136490433
Cites: 85
Cited by: 6
Related to: 10