Work

Development of an oleophobic woven fabric microfiltration membrane for decentralized sanitation applications

Year: 2020
Type: dissertation
Abstract: ENGLISH ABSTRACT: Developing countries are faced with the major challenge of providing safe and adequate sanitation to their citizens. Decentralized sanitation systems have a great potential to address this challenge. The woven fabric immersed membrane bioreactor (WF-IMBR) technology is a promising option for such systems. This technology employs robust woven fabric microfilter (WFMF), developed in South Africa. However, organic fouling poses a major challenge to its application. Fine organics tend to penetrate the membrane, reduce productivity, and make cleaning difficult. Hence, the overall aim of this study was to develop and evaluate an oleophobic WFMF (OWFMF) membrane, which could repel organics. First, the fouling characteristics of the WFMF membrane were investigated by performing filtration and membrane cleaning experiments on a laboratory filtration unit, using 0.5 g/L of yeast suspensions as synthetic wastewater. From the flux and pressure drop profiles, fouling resistance profiles were generated. The fouling resistance profiles showed that fouling occurred in two stages, namely rapid irreversible fouling followed by progressive cake layer formation. The irreversible fouling occurred within the first five to ten minutes of filtration and could not be removed by water scouring, air scouring or backwashing. The cake layer could easily be removed by these methods. Photomicrographs of the cleaned and fouled membranes revealed that the irreversible foulants settled at the intersections of groups of fibres, where water scouring, and air scouring were unable to reach. The second phase of the study focused on the development of an OWFMF membrane. The process involved chemically bonding fluorocarbons onto a standard WFMF membrane through a pad-dry-cure process. The process was optimized using a 33full factorial design. The factors considered include fluorocarbon concentration (40 –80 g/L), padding pressure (0.5 –3.5 bar) and fabric speed (1 –3.5 m/min).The optimum conditions were identified as: 80g/L fluorocarbon concentration; 2 bar padding pressure; and 1 m/min fabric speed at 20 g/L wetting agent concentration, 180 ̊curing temperature and 90 seconds curing time.Unlike the standard WFMF which was non-oleophobic, i.e. oil droplets easily penetrated the fabric, the developed OWFMF membrane showed a high oleophobicity with an oil contact angle of 123.5 ̊. In the third stage, the OWFMF and the standard WFMF membranes were then compared in terms of pure water fluxes, permeate quality, fouling characteristics and ease of cleaning. This was done on yeast suspensions. Compared with the standard WFMF membrane, the OWFMF membrane showed a 60% reduction of the irreversible fouling resistance after five cycles of filtration and cleaning. This indicated that the oleophobic surface was very effective at repelling most of the organics; which made the cleaning of the membrane easier. Furthermore, the OWFMF membrane had a slightly enhanced flux when compared to the standard WFMF, and yet still achieved a permeate turbidity of below 1 NTU. In terms of stability, the oleophobic surface was fairly stable and only initial minimal erosion wasobserved.With the improved fouling resistance and ease of cleaning, the OWFMF membrane has a great potential for decentralized sanitation applications in developing countries. However, further performance evaluation of the long-term stability and performance on real wastewaters will be necessary.
Language: English
Open Access status: green
OpenAlex ID: W3141761741
Cites: 190
Cited by: 1
Related to: 10