Work

Data-driven model predictive control of buildings

Year: 2020
Type: dissertation
Abstract: Buildings account for 30% of the final global energy and 28% of the total carbon \nemissions in the world. Heating, ventilation and air-conditioning (HVAC) systems can \nconsume up to 60% of the total energy consumption in buildings. Improving the energy \nefficiency of HVAC systems is important in reducing carbon emissions and mitigating \nrisks associated with global climate change such as overheating of indoor environments. \nAnother benefit of improving the energy efficiency of HVAC systems is to save energy \ncost for building owners. Many previous studies focused on the design and retrofit for \nimproving building energy efficiency, but few of them looked into how to improve the \nbuilding operation. As the primary building energy system, Commercial HVAC systems \nare complex because of the interaction of a large number of sub-systems and \nuncertainties resulting from the interactions of building mass, thermal inertia, weather \nand occupancy. The application of Model Predictive Control (MPC) has received \nsignificant attention in the last few years from researchers and the industry to the control \nand management of building energy systems. Despite increasing research on using MPC \nfor improving the energy efficiency of HVAC systems, few of them utilise flexibilities such \nas time of use (ToU) and killowatt Max (kWmax) control. \nThis research investigates how the control of building elements (such as windows) and \nHVAC systems could improve energy efficiency and thermal comfort. This study has \nbeen divided into two parts based on three case studies. The first part of the study \ndemonstrates a physics-based case study that assesses the impact of climates on the \nindoor environment and how the control of window openings for natural ventilation can \nreduce overheating risk in current and future climates. The results find bedrooms are \neasier to suffer overheating risks than living rooms but increasing openings for natural \nventilation is more effective in reducing overheating hours in bedrooms. By opening 20% \nof window area for natural ventilation, the results show that 2%, 17% and 45% of the \ntotal 108 dwellings’ bedrooms are overheated in the 2030s, 2050s and 2080s, compared \nto living rooms with 30%, 60% and 89%. In the 2030s, increasing the window opening \narea ratio from 20% to 80% can reduce the number of dwellings with overheating risk in \nbedrooms from 32 to 14, but find nearly no change in living rooms. However, the passive \ncontrol of building elements such as windows, blinds and overhangs has limitations in \nadapting dwellings to climate change. With a maximum window area for opening plus \nblinds and 2-meter overhangs, it can still not eliminate overheating risk in most UK cities \nin the 2080s. \nAfter demonstrating the limitations of the control of building elements in future climates, \nthe second part of the study introduces two case studies which turn to study the \niv \noptimisation of controls for HVAC systems in a residential and a commercial building. \nThe research goes towards the development of data-driven MPC controllers for the two \nbuildings. A sensor network has been established for building energy metering and \nenvironmental monitoring in the residential building to enable remote control of the \nheating system with the MPC controller. It is found that the MPC controller can improve \nthermal comfort by allowing more hours with room temperatures within the design \ncomfort band. In the commercial case study building, a data-driven MPC controller has \nbeen developed, running optimal control of 9 indoor units per 15 minutes to maintain \nindoor temperatures within the design comfort band. It proposes a demand response \nmethod to minimize energy cost by integrating with ToU and kWmax use cases. The \nstudy finds that MPC could take advantage of energy tariffs and flexibility by shifting the \nloads from high-demand periods to low-demand periods. With the data-driven MPC, it \ncould reduce the peak energy consumption by up to 36% and the peak power by about \n15%.
Author: Kui Weng
Language: English
Open Access status: green
OpenAlex ID: W3159843536
Cites:
Cited by: 1
Related to: 10