Year: 2020
Type: dissertation
Abstract: The work presented in this PhD thesis aims at developing an integrated process that maximises the potential corn fibre by-products to be used as bio-vanillin production. The development of this process compromised in first step, recovery ferulic acid (substrate for bio-vanillin production) from corn fibre. A mild alkaline extraction to recovery ferulic acid from wet corn fibre was optimised, resulting an extract with a concentration of 2.10 ± 0.09 g.L-1 and a recovery yield of 11.14 ± 1.00 Kg ferulic acid.Ton - 1 dry corn fibre (in pilot scale). The optimised seven-hour process uses a low concentration of sodium hydroxide (0.25 M), a mild temperature (30º C) and a liquid-to-solid ratio of 10 g solvent.g-1 dry fibre. Alternatively, an enzymatic hydrolysis using available commercial enzyme preparations was studied. However, even with a hydrothermal pre-treatment before the enzymatic hydrolysis, the yield of ferulic acid was lower than in mild alkaline extraction. The ferulic acid released by alkaline extraction was successfully separated from the arabinoxylans (addvalue compounds, with high viscosity), by ultrafiltration using the membrane Nadir® UP150. Through a mathematical modelling, involving the response surface methodology (RMS), it was possible to determine that the conditions of ultrafiltration (temperature, initial cross-flow velocity and transmembrane pressure) that led to the maximisation of ultrafiltration performance, with values of minimised of ferulic acid rejection and with maximised values of arabinoxylans rejection and permeabilities. The adsorption process with the Macronet® MN102 resin allowed the elimination/reduction of compounds with antimicrobial effect from ultrafiltrate alkaline extract. These compounds were having a negative effect on the bioconversion of ferulic acid into vanillin by the Amycolatopsis sp. ATCC 39116. The study of the adsorption process in columns continuous allowed to determinate the parameters for scale up the process. The bio-vanillin production by Amycolatopsis sp. ATCC 39116 was studied using synthetic ferulic acid as a precursor, aiming at achieving maximised overall vanillin productivities. It is also compared the bio-vanillin production using commercial and ferulic acid extracted from corn fibre after the purification. Similar synthetic parameters were obtained using both types of ferulic acid, except vanillin yield, that was inferior using ferulic acid extracted from corn fibre, when compared with synthetic ferulic acid. To obtain purified vanillin from the bioconversion broth, organophilic pervaporation and vacuum distillation processes were studied and compared. In both process was possible to recover vanillin, without the presence of undesirable contaminants. Vacuum distillation with consecutive pulses was preferred over pervaporation due to the higher vanillin fluxes obtained: 2.7±0.1 g.m-2h-1 for vacuum distillation compared to 1.19±0.01 g.m-2h-1 for pervaporation, although the highest energy consumption in vacuum distillation. Concerning the economic assessment of the bio-vanillin plant (20 ton/ano), the payback period calculates was 0.9 years.
Author: Rita Valério
Institution: Universidade Nova de Lisboa
Language: English
Subfield: Biotechnology
Domain: Life Sciences
Open Access status: green
OpenAlex ID: W3161738428
