Work

Transparent conductive oxides for silicon heterojunction solar cells: interaction between materials and device

Year: 2021
Type: dissertation
Abstract: Crystalline-silicon (c-Si) based solar cells are the dominating technology supplying the market of photovoltaic modules presently and a sustainable method of electricity generation. One promising solar cell concept that can boost the efficiency of this technology and is gaining on industrial relevance is the silicon heterojunction (SHJ) solar cell. In this work, the behavior of three industrial relevant transparent conductive oxides (TCO), namely indium tin oxide (ITO), aluminum-doped zinc oxide (AZO) and hydrogenated indium oxide (IOH) when implemented as front electrodes in high power conversion efficiency (PCE) (>23%) silicon heterojunction (SHJ) solar cells, is studied. The implementation approach is oriented to maximize optoelectrical performance of these materials on the solar cells. For this purpose, a simulation model to describe series resistance behavior of solar cell devices in dependence of TCO sheet resistance is developed. A key aspect of the model is to consider the lateral and transversal transport in the silicon absorber in interaction with the TCO conductivity. The solar cell design (front-junction or rear-junction) as well as the wafer conductivity under operating conditions, strongly influence the device's series resistance. From the simulations, it is concluded that a rear-junction device is advantageous over the front-junction design in terms of series resistance when a critical TCO sheet resistance value is surpassed. Furthermore, it is found that the increased lateral transport wafer support in the rear-junction design allows the implementation of a lower conductive TCO in the example of AZO reaching a solar cell conversion efficiency above 23%. To complete the analysis, optical simulations are carried out. Optimal thinner layers for the respective TCO in combination with an amorphous silicon oxide (a-SiO2) second anti-reflective coating (ARC) in terms of maximum short circuit current density, are defined. The combined electrical and optical simulations outcome, proposes that devices with thinner TCOs maintain or outperform the PCE of solar cells with standard TCO layer thickness (~75 nm) when implemented in rear-junction devices. The results of experimental solar cells with both standard and thinner TCO layers confirm this expectation. Through the developed simulation models, a TCO benchmarking method, is proposed.
Source: DepositOnce
Language: English
Open Access status: green
OpenAlex ID: W3177053014
Cites:
Cited by: 1
Related to: 10