Work

Impact of molecular structure on water vapour sorption properties in nanostructured polymeric films

Year: 2011
Type: dissertation
Abstract: In this study, the use of surfactants, plate-like clays, organophilic molecules and side-chain crystallinity was investigated for their impact on the transport mechanisms of water vapour through polymer films.A model polymer latex, poly(styrene-co-butyl acrylate), was prepared using miniemulsion polymerization.Three different types of surfactants, sodium dodecyl benzene sulfonate (SDBS, an anionic surfactant), octyl phenol ethoxylate (OPE, a nonionic surfactant) and dodecyl ammonium-3-butenoate (DA3B, a reactive surfactant) were used to stabilize the latex.Films were prepared from the resultant latices and their water vapour sorption behaviour determined across a water vapour partial pressure range of 0.1 to 0.9.Sigmoidal kinetic behaviour was seen for all three films, with the DA3B stabilized film exhibiting high diffusion coefficients compared to films stabilized with SDBS and OPE.The thermodynamic behaviour of the films differed and was dependent on the reactivity of the surfactant.SDBS and OPE stabilized films exhibited Flory-Huggins behaviour, while the DA3B stabilized film followed Henry's Law.Despite significant differences in terms of these properties, the permeability coefficients were similar for the three films across the water vapour partial pressure range evaluated.The impact of sodium montmorillonite (Na-MMT) clay and an organophilic modifier, 2acrylamido-2-methylpropanesulfonic acid (AMPS), on the water vapour sorption properties of poly(styrene-co-butyl acrylate) was evaluated.These polymer clay nanocomposites (PCNs) were synthesized using miniemulsion polymerization.The resultant latex films were characterized and used for water vapour sorption analyses.It was shown that complete exfoliation of the Na-MMT was necessary to minimize the equilibrium water vapour uptake.Even when Na-MMT was completely exfoliated, the amount of water vapour sorbed by the PCN was high and this was attributed to the hydrophilic nature of the clay.Using a least squares regression fit, good correlation was obtained between the experimental isotherms and the sorption behaviour predicted by the Dual Mode Sorption model which was originally developed for polymers in their glassy state.
Language: English
Open Access status: green
OpenAlex ID: W36571235
Cites: 23
Cited by: 1
Related to: 10