Work

Dynamic High-Rate-Deposition of Silicon Thin Film Layers for Photovoltaic Devices

Year: 2008
Type: article
Abstract: A highly productive inline deposition system called “line source” is used to deposit amorphous and microcrystalline silicon single layers and pin- solar cells. The most important features of this deposition system are the linear plasma sources with a width of 500mm operated at an excitation frequency of 81.36 MHz in combination with moving substrates. A very homogeneous deposition of thin film silicon layers with layer thickness variations of less than +/- 5% was achieved. Amorphous and microcrystalline silicon single junction solar cells were dynamically fabricated with initial efficiencies of 8.3% and 5.2%, respectively. The dynamic deposition rate of these solar cells is 6.75nm.m/min in case of a-Si:H and 2.63nm.m/min for μc-Si:H. The amorphous silicon solar cells show a relative degradation of the initial efficiency of 29% while microcrystalline silicon cells only degrade about 6%. In this work it will be shown that an enhancement of the deposition rate during the i-layer deposition of a-Si:H solar cells has only a weak negative influence on the initial efficiencies of the cells. Further on, the effect of the substrate velocity on the solar cell characteristics of a-Si:H solar cells is investigated. Finally, a productivity estimation of the line source concept is presented. The influence of characteristic line source parameters like substrate velocity or electrode width on the estimated solar power production per year is discussed.
Source: EU PVSEC
Language: English
Open Access status: green
OpenAlex ID: W425644172
FWCI: 0.274
Cites:
Cited by: 2
Related to: 10