Work

Effect of Bending Process on Microstructure, Mechanical Properties and Crack Formation of 5% Ni Steel

Year: 2022

Type: article

Abstract: The 5% Ni steel is often used to make steel storage tanks to store liquefied natural gas (LNG). Herein, the microstructure and mechanical properties of 5% Ni steel samples during bending were studied through combining scanning electron microscopy, energy dispersive spectroscopy, optical microscopy, X-ray diffraction, and electron backscattered diffractometer methods with tensile tests. The outer and inner arcs underwent tensile and compressive stress, respectively, resulting in a severely deformed microstructure with a high density of dislocation, improving both the tensile and yield strengths. The ductility of the 5% Ni steel samples decreased significantly after bending due to the work hardening and dislocation accumulation. During bending, the shear bands occurred at the surface or subsurface, which were caused by strain localization. Amounts of “harder” grains with high TF and more orange and red KAM areas with high local strain at the outer and inner arcs produced a greater stress concentration than that of the mid-thickness, which can induce crack initiation and propagation due to the large deformation during bending.

Source: Metals

DOI: 10.3390/met12071188

Authors: Fengyong Niu, Jingshu He, Denghui Liu, Xiurong Zuo, Minghui Cai

Institutions: Zhengzhou University, Northeastern University

Language: English

Topic: Microstructure and Mechanical Properties of Steels

Subfield: Mechanical Engineering

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $2,094

Funder: National Natural Science Foundation of China