Damage and in Situ Annealing During Ion Implantation
Year: 1982
Type: conference-paper
Abstract: Formation of amorphous (..cap alpha..) layers in Si during ion implantation in the energy range 100 keV-11 MeV and temperature range liquid nitrogen (LN)-100/sup 0/C has been investigated. Cross-sectional transmission electron microscopy (XTEM) shows that buried amorphous layers can be created for both room temperature (RT) and LN temperature implants, with a wider 100 percent amorphous region for the LN cooled case. The relative narrowing of the ..cap alpha.. layer during RT implantation is attributed to in-situ annealing. Implantation to the same fluence at temperatures above 100/sup 0/C does not produce ..cap alpha.. layers. To further investigate in situ annealing effects, specimens already containing buried ..cap alpha.. layers were further irradiated with ion beams in the temperature range RT-400/sup 0/C. It was found that isolated small ..cap alpha.. zones (less than or equal to 50 diameter) embedded in the crystalline matrix near the two ..cap alpha../c interfaces dissolved into the crystal but the thickness of the 100 percent ..cap alpha.. layer was not appreciably affected by further implantation at 200/sup 0/C. A model for in situ annealing during implantation is presented.
Institution: University of California, Berkeley
Language: English
Subfield: Surfaces, Coatings and Films
Field: Materials Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W4294074431
