Work

Statistical sampling method to verify the homogeneity of full-scale cement-solidified radioactive waste

Year: 2024

Type: article

Abstract: Homogeneity is an important factor for ensuring the structural stability of solidified radioactive waste, and the most effective approach for assessing its homogeneity is by performing compressive strength measurements using the minimum amount of coring specimens. The efficiency of detecting inhomogeneous waste is affected by the coring position and number of coring positions. However, no guidelines exist for coring solidified waste for compressive-strength tests. Therefore, this study compared uniform, random, and quasi-Monte Carlo sampling methods to determine the most effective core position. Further, the effects of different sampling amounts on the detection rate of inhomogeneous solidified waste were observed, and the detection rate of the inhomogeneous waste was obtained by modeling the coring procedure of solidified radioactive waste using MATLAB. Thus, a sampling method and a method for increasing the specimen amount, both of which can efficiently detect inhomogeneous waste during compressive strength tests, were presented in this paper. The results of this study can be applied as background data for developing homogeneity assessment guidelines for solidified radioactive waste.

Source: Nuclear Engineering and Technology

DOI: 10.1016/j.net.2024.08.020

Authors: Hyeongjin Byeon, Ugyu Jeong, Jaeyeong Park

Institution: Ulsan National Institute of Science and Technology

Language: English

Topic: Nuclear and radioactivity studies

Subfield: Safety, Risk, Reliability and Quality

Field: Engineering

Domain: Physical Sciences

Open Access status: gold

Estimated APC paid: $200

Funders: Nuclear Safety and Security Commission, Korea Radiation Safety Foundation